Deutz-Fahr Agrotron TTV 1145 or New Holland TM 150 (Traktorenlexikon)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron TTV 1145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron TTV 1145 | TM 150 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 103.4 kW (138.7 hp)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 103 kW (138 hp)Traktorenlexikon, “New Holland TM150” | Not comparableNot comparable on power at the PTO shaft: the Agrotron TTV 1145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron TTV 1145 and the TM 150. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron TTV 1145 and the TM 150. |
| Which pumps more oil for implements? | 120.0 L/min (31.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 118.2 L/min (31.2 gpm)Traktorenlexikon, “New Holland TM150” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | — | 6,956 kg (15,335 lb)Traktorenlexikon, “New Holland TM150” | No figureNo call on three-point lift: no figure on record for the Agrotron TTV 1145. |
| Which is heavier, for traction? | 6,525 kg (14,385 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 6,333 kg (13,962 lb)Traktorenlexikon, “New Holland TM150” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 10,500 kg (23,149 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 10,000 kg (22,046 lb)Traktorenlexikon, “New Holland TM150” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 18 to 24 forwardTraktorenlexikon, “New Holland TM150” | DifferTransmissions differ in kind: the Deutz-Fahr Agrotron TTV 1145 is stepless (CVT) and the New Holland TM 150 has 18 to 24 forward gears — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron TTV 1145 and the TM 150. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM150” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 540/540E/1000 rpmTraktorenlexikon, “New Holland TM150” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | independentTraktorenlexikon, “New Holland TM150” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1145” | 4WDTraktorenlexikon, “New Holland TM150”; OECD test report 1920, 2000 | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2007 | 1999–2002 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the Deutz-Fahr Agrotron TTV 1145 is stepless (CVT) and the New Holland TM 150 has 18 to 24 forward gears — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrotron TTV 1145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.
← Every figure for both machines, side by side, with sources