Deutz-Fahr Agrotron TTV 1130 or Massey Ferguson MF 5470 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron TTV 1130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5470 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrotron TTV 1130 suits loader and hydraulic implement work better on this data: 21% (21.0 L/min / 5.5 gpm) more hydraulic flow.
- The Deutz-Fahr Agrotron TTV 1130 suits road haulage better on this data: 25% (2,100 kg / 4,630 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron TTV 1130 | MF 5470 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 92.0 kW (123.4 hp)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 92 kW (123 hp)Traktorenlexikon, “Massey Ferguson MF 5470” | Not comparableNot comparable on power at the PTO shaft: the Agrotron TTV 1130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5470 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron TTV 1130 and the MF 5470 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron TTV 1130 and the MF 5470 (A). |
| Which pumps more oil for implements? | 120.0 L/min (31.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 99.0 L/min (26.2 gpm)Traktorenlexikon, “Massey Ferguson MF 5470” | AheadThe Deutz-Fahr Agrotron TTV 1130 has 21% more hydraulic flow (21.0 L/min / 5.5 gpm) than the Massey Ferguson MF 5470 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | — | No figureNo call on three-point lift: no figure on record for the MF 5470 (A). |
| Which is heavier, for traction? | 6,525 kg (14,385 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 4,420 kg (9,744 lb)Traktorenlexikon, “Massey Ferguson MF 5470” | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron TTV 1130 is 48% heavier (2,105 kg / 4,641 lb) than the Massey Ferguson MF 5470 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 10,500 kg (23,149 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 8,400 kg (18,519 lb)Traktorenlexikon, “Massey Ferguson MF 5470” | AheadThe Deutz-Fahr Agrotron TTV 1130 has 25% higher maximum permissible mass (2,100 kg / 4,630 lb) than the Massey Ferguson MF 5470 (A) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 16 forwardTraktorenlexikon, “Massey Ferguson MF 5470” | DifferTransmissions differ in kind: the Deutz-Fahr Agrotron TTV 1130 is stepless (CVT) and the Massey Ferguson MF 5470 (A) has 16 forward gears — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron TTV 1130 and the MF 5470 (A). |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5470” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5470” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | — | No figureNo call on PTO independence: not stated for the MF 5470 (A). |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 5470” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2006 | 2006–2012 | Ahead (a fact, not an advantage)The Massey Ferguson MF 5470 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron TTV 1130 has 21% more hydraulic flow (21.0 L/min / 5.5 gpm) than the Massey Ferguson MF 5470 (A) (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron TTV 1130 is 48% heavier (2,105 kg / 4,641 lb) than the Massey Ferguson MF 5470 (A) (both unladen weight, as stated by the source).
- The Deutz-Fahr Agrotron TTV 1130 has 25% higher maximum permissible mass (2,100 kg / 4,630 lb) than the Massey Ferguson MF 5470 (A) (both maximum permissible mass, as stated by the source).
- The Massey Ferguson MF 5470 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Transmissions differ in kind: the Deutz-Fahr Agrotron TTV 1130 is stepless (CVT) and the Massey Ferguson MF 5470 (A) has 16 forward gears — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrotron TTV 1130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5470 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources