7 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron M 6402007–2012No measured PTO figureTractor twoDeutz-Fahr Agrotron X 7202006–2013No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (58%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | Agrotron M 640 | Agrotron X 720 | Gap |
|---|---|---|---|
| Engine | |||
| Engine declared | Deutz AG TCD 2012 L06 4V | — | — |
| Displacement declared | 6.06 L | — | — |
| Maximum torque declared | 586 lb·ft · 795 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9–31.1 mph · 40–50 km/h | — |
| Clutch declared | Electro-hydraulically operated comfort clutch, running in oil bath | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 21.9 gpm · 83.0 L/min | — | — |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540 rpm / 750 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,162 lb · 5,970 kg | 20,790–23,005 lb · 9,430–10,435 kg | differs |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 108.9 in · 2,767 mm | 121.9 in · 3,095 mm | +12% Agrotron X 720 |
| Length declared | 187.3 in · 4,757 mm | 207.4 in · 5,268 mm | +11% Agrotron X 720 |
| Width declared | 100.4 in · 2,550 mm | 108.3 in · 2,750 mm | +8% Agrotron X 720 |
| Ground clearance declared | 22.4 in · 570 mm | 19.4–21.6 in · 494–548 mm | differs |
| Turning radius, braked declared | 16.8 ft · 5.13 m | 22.1 ft · 6.75 m | +32% Agrotron X 720 |
| Fuel tank declared | 322.3 qt · 305 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron M 640 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron M 640”
Deutz-Fahr Agrotron X 720 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron X 720”