Deutz-Fahr Agrotron M 640 or Deutz-Fahr Agrotron TTV 610?
Which should you choose?
On performance, every comparable figure that differs favours the Deutz-Fahr Agrotron TTV 610: hydraulic flow.
- The Deutz-Fahr Agrotron TTV 610 suits loader and hydraulic implement work better on this data: 45% (37.0 L/min / 9.8 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron M 640 | Agrotron TTV 610 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 109.2 kW (146.4 hp)Traktorenlexikon, “Deutz-Fahr Agrotron M 640” | 110.3 kW (148 hp)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 610” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron M 640 and the Agrotron TTV 610. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron M 640 and the Agrotron TTV 610. |
| Which pumps more oil for implements? | 83.0 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron M 640” | 120 L/min (31.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 610” | AheadThe Deutz-Fahr Agrotron TTV 610 has 45% more hydraulic flow (37.0 L/min / 9.8 gpm) than the Deutz-Fahr Agrotron M 640 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 9,200 kg (20,283 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 610” | No figureNo call on three-point lift: no figure on record for the Agrotron M 640. |
| Which is heavier, for traction? | 5,970 kg (13,162 lb)Traktorenlexikon, “Deutz-Fahr Agrotron M 640” | 6,525 kg (14,385 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 610” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Agrotron M 640 and the Agrotron TTV 610. |
| Which has the wider choice of gears? | 40 forwardTraktorenlexikon, “Deutz-Fahr Agrotron M 640” | Stepless (CVT)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 610” | DifferTransmissions differ in kind: the Deutz-Fahr Agrotron M 640 has 40 forward gears and the Deutz-Fahr Agrotron TTV 610 is stepless (CVT) — not called. |
| Which offers a creeper range? | YesTraktorenlexikon, “Deutz-Fahr Agrotron M 640” | — | No figureNo call on a creeper range: not stated for the Agrotron TTV 610. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron M 640” | 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 610” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Deutz-Fahr Agrotron M 640” | 540/1000/540E/1000E rpmTraktorenlexikon, “Deutz-Fahr Agrotron TTV 610” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the Agrotron M 640 and the Agrotron TTV 610. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron M 640” | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron TTV 610”; OECD test report 2690, 2012 | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2007–2012 | 2007– | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron TTV 610 has 45% more hydraulic flow (37.0 L/min / 9.8 gpm) than the Deutz-Fahr Agrotron M 640 (both pump flow, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the Deutz-Fahr Agrotron M 640 has 40 forward gears and the Deutz-Fahr Agrotron TTV 610 is stepless (CVT) — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources