8 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrotron K 4302008–2013No measured PTO figureTractor twoNew Holland T 6020 Elite2007–2012No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron K 430 and the T 6020 Elite → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron K 430 and New Holland T 6020 Elite, field by field
FieldAgrotron K 430T 6020 EliteGap
Engine
Engine power, claimed claimed110 hp110.5 hp—
Engine declared—IVECO-NEF 445 TA/EGF—
Displacement declared—4.49 L—
Maximum torque declared363 lb·ft · 492 N·m361 lb·ft · 489 N·m—
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h24.9–31.1 mph · 40–50 km/h—
Clutch declaredElectro-hydraulic comfort clutch running in an oil bathelectrohydraulically operated wet Case-New Holland multi-plate clutchdiffers
Hydraulics & hitch
Pump flow declared—28.4 gpm · 107.6 L/min—
Pressure declared—3,046 psi · 210 bar—
Rear PTO speeds declared540/540E/1000/1000E rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared9,789 lb · 4,440 kg11,508 lb · 5,220 kg+18% T 6020 Elite
Maximum permissible mass declared17,637 lb · 8,000 kg19,842 lb · 9,000 kg+13% T 6020 Elite
Wheelbase declared95.2 in · 2,419 mm95.0 in · 2,412 mm—
Length declared163.0 in · 4,139 mm180.5 in · 4,585 mm+11% T 6020 Elite
Width declared95.7 in · 2,430 mm96.5–115.0 in · 2,450–2,922 mmdiffers
Ground clearance declared15.7 in · 400 mm21.0 in · 533 mm+33% T 6020 Elite
Turning radius, braked declared15.3 ft · 4.65 m——
Fuel tank declared190.2 qt · 180 L160.6–186.0 qt · 152.0–176.0 Ldiffers

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agrotron K 430 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron K 430”

New Holland T 6020 Elite sources

Source
  • Source: Traktorenlexikon, “New Holland T 6020 Elite”