10 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron K 4302008–2013No measured PTO figureTractor twoNew Holland T 6020 Delta (Traktorenlexikon)2007–2012No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron K 430 and the T 6020 Delta → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Agrotron K 430 | T 6020 Delta | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 110 hp | 110.5 hp | — |
| Engine declared | — | IVECO-NEF F 4 GE 9484 D (TIER-III) | — |
| Displacement declared | — | 4.49 L | — |
| Maximum torque declared | 363 lb·ft · 492 N·m | 393 lb·ft · 533 N·m | +8% T 6020 Delta |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Electro-hydraulic comfort clutch running in an oil bath | Pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540/540E/1000/1000E rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,789 lb · 4,440 kg | 10,406 lb · 4,720 kg | +6% T 6020 Delta |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | 19,842 lb · 9,000 kg | +13% T 6020 Delta |
| Wheelbase declared | 95.2 in · 2,419 mm | 95.0 in · 2,412 mm | — |
| Length declared | 163.0 in · 4,139 mm | 194.9 in · 4,950 mm | +20% T 6020 Delta |
| Width declared | 95.7 in · 2,430 mm | 89.8–115.0 in · 2,280–2,922 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 18.8 in · 478 mm | +20% T 6020 Delta |
| Turning radius, braked declared | 15.3 ft · 4.65 m | — | — |
| Fuel tank declared | 190.2 qt · 180 L | 160.6–186.0 qt · 152.0–176.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron K 430 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron K 430”
New Holland T 6020 Delta (Traktorenlexikon) sources
- Source: Traktorenlexikon, “New Holland T 6020 Delta”