Deutz-Fahr Agrotron K 110 (Profiline) vs Landini 105 DT

10 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron K 110 (Profiline) and the 105 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron K 110 (Profiline) and Landini 105 DT, field by field
Field	Agrotron K 110 (Profiline)	105 DT	Gap
Engine
Engine power, claimed claimed	102.6 hp	101.6 hp	—
Engine declared	Deutz BF6M 2012 C	Perkins 1006.6 HR-4	differs
Displacement declared	6.06 L	5.99 L	—
Maximum torque declared	308 lb·ft · 418 N·m	291 lb·ft · 395 N·m	+6% Agrotron K 110 (Profiline)
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	pedal-operated dry single-disc clutch, configured as a driving clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	16.2 gpm · 61.5 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	14,330 lb · 6,500 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,692 lb · 4,850 kg	11,927 lb · 5,410 kg	+12% 105 DT
Maximum permissible mass declared	17,637 lb · 8,000 kg	22,928 lb · 10,400 kg	+30% 105 DT
Wheelbase declared	104.2 in · 2,647 mm	110.2 in · 2,800 mm	+6% 105 DT
Length declared	171.9 in · 4,367 mm	188.2 in · 4,780 mm	+9% 105 DT
Width declared	88.8 in · 2,256 mm	92.1 in · 2,340 mm	—
Height declared	104.7 in · 2,660 mm	113.0 in · 2,870 mm	+8% 105 DT
Ground clearance declared	19.1 in · 485 mm	21.3 in · 540 mm	+11% 105 DT
Turning radius, braked declared	—	19.2 ft · 5.85 m	—
Fuel tank declared	190.2 qt · 180 L	190.2 qt · 180 L	—

Source

Source