Deutz-Fahr Agrotron K 100 (Profiline) vs ZETOR 9641

9 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron K 100 (Profiline) and the 9641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron K 100 (Profiline) and ZETOR 9641, field by field
Field	Agrotron K 100 (Profiline)	9641	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Deutz BF4M 2012 C	SDF Z-1300	differs
Displacement declared	4.04 L	4.16 L	—
Maximum torque declared	292 lb·ft · 396 N·m	254 lb·ft · 344 N·m	+15% Agrotron K 100 (Profiline)
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Electro-hydraulically operated ZF multi-disc clutch running in oil bath	Pedal-operated, dry Zetor single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	15.3 gpm · 58.0 L/min	—
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	12,434 lb · 5,640 kg	+10% Agrotron K 100 (Profiline)
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,789 lb · 4,440 kg	9,766 lb · 4,430 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	14,771 lb · 6,700 kg	+12% Agrotron K 100 (Profiline)
Wheelbase declared	95.2 in · 2,419 mm	94.0 in · 2,388 mm	—
Length declared	163.0 in · 4,139 mm	189.6 in · 4,815 mm	+16% 9641
Width declared	88.8 in · 2,256 mm	85.2 in · 2,165 mm	—
Height declared	103.5 in · 2,630 mm	106.9 in · 2,715 mm	—
Ground clearance declared	19.1 in · 485 mm	14.3 in · 362 mm	+34% Agrotron K 100 (Profiline)
Fuel tank declared	190.2 qt · 180 L	190.2 qt · 180.0 L	—

Source

Source