Deutz-Fahr Agrotron K 100 (Profiline) vs VALMET 6400-4

10 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron K 100 (Profiline) and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron K 100 (Profiline) and VALMET 6400-4, field by field
Field	Agrotron K 100 (Profiline)	6400-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Deutz BF4M 2012 C	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	4.04 L	4.40 L	+9% 6400-4
Maximum torque declared	292 lb·ft · 396 N·m	—	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Electro-hydraulically operated ZF multi-disc clutch running in oil bath	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	18.0 gpm · 68.2 L/min	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,789 lb · 4,440 kg	9,259 lb · 4,200 kg	+6% Agrotron K 100 (Profiline)
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	95.2 in · 2,419 mm	91.6 in · 2,326 mm	—
Length declared	163.0 in · 4,139 mm	173.5 in · 4,408 mm	+6% 6400-4
Width declared	88.8 in · 2,256 mm	78.1 in · 1,985 mm	+14% Agrotron K 100 (Profiline)
Height declared	103.5 in · 2,630 mm	107.7 in · 2,735 mm	—
Ground clearance declared	19.1 in · 485 mm	18.1 in · 460 mm	+5% Agrotron K 100 (Profiline)
Turning radius, braked declared	—	13.8 ft · 4.20 m	—
Fuel tank declared	190.2 qt · 180 L	174.4 qt · 165.0 L	+9% Agrotron K 100 (Profiline)

Source

Source