Deutz-Fahr Agrotron 90 (New) or Fendt Farmer 280 S?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 90 (New) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 280 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 90 (New) suits loader and hydraulic implement work better on this data: 105% (38.4 L/min / 10.1 gpm) more hydraulic flow.
  • The Deutz-Fahr Agrotron 90 (New) suits road haulage better on this data: 50% (2,500 kg / 5,512 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 90 (New) and Fendt Farmer 280 S, with the call on each
QuestionAgrotron 90 (New)Farmer 280 SCall
Which puts more power through the PTO shaft?58.1 kW (77.9 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”58.6 kW (78.6 hp)Traktorenlexikon, “Fendt Farmer 280 S”Not comparableNot comparable on power at the PTO shaft: the Agrotron 90 (New) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 280 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 90 (New) and the Farmer 280 S.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 90 (New) and the Farmer 280 S.
Which pumps more oil for implements?75 L/min (19.8 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”36.6 L/min (9.7 gpm)Traktorenlexikon, “Fendt Farmer 280 S”AheadThe Deutz-Fahr Agrotron 90 (New) has 105% more hydraulic flow (38.4 L/min / 10.1 gpm) than the Fendt Farmer 280 S (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”No figureNo call on three-point lift: no figure on record for the Farmer 280 S.
Which is heavier, for traction?4,410 kg (9,722 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”2,970 kg (6,548 lb)Traktorenlexikon, “Fendt Farmer 280 S”Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 90 (New) is 48% heavier (1,440 kg / 3,175 lb) than the Fendt Farmer 280 S (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”5,000 kg (11,023 lb)Traktorenlexikon, “Fendt Farmer 280 S”AheadThe Deutz-Fahr Agrotron 90 (New) has 50% higher maximum permissible mass (2,500 kg / 5,512 lb) than the Fendt Farmer 280 S (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”21Traktorenlexikon, “Fendt Farmer 280 S”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 90 (New) and the Farmer 280 S.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 280 S”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”540/750/1000 rpmTraktorenlexikon, “Fendt Farmer 280 S”AheadThe Fendt Farmer 280 S offers 750 rpm at the PTO, which the Deutz-Fahr Agrotron 90 (New) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”independentTraktorenlexikon, “Fendt Farmer 280 S”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 90 (New)”4WDTraktorenlexikon, “Fendt Farmer 280 S”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20051996–2003Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 90 (New) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 90 (New) has 105% more hydraulic flow (38.4 L/min / 10.1 gpm) than the Fendt Farmer 280 S (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 90 (New) is 48% heavier (1,440 kg / 3,175 lb) than the Fendt Farmer 280 S (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrotron 90 (New) has 50% higher maximum permissible mass (2,500 kg / 5,512 lb) than the Fendt Farmer 280 S (both maximum permissible mass, as stated by the source).
  • The Fendt Farmer 280 S offers 750 rpm at the PTO, which the Deutz-Fahr Agrotron 90 (New) does not (as stated by the sources).
  • The Deutz-Fahr Agrotron 90 (New) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 90 (New) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 280 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.

← Every figure for both machines, side by side, with sources