6 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 8280 TTVfrom 2020No measured PTO figureTractor twoFendt 828 Variofrom 2010No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 8280 TTV and the 828 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Agrotron 8280 TTV | 828 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 264 hp | 275 hp | — |
| Engine declared | Deutz AG TTCD 6.1 L6 (Agri) | Deutz TCD 2012 L06 4V | differs |
| Displacement declared | 6.06 L | 6.06 L | — |
| Maximum torque declared | 904 lb·ft · 1,226 N·m | 892 lb·ft · 1,210 N·m | — |
| Transmission | |||
| Top speed declared | 24.9–37.3 mph · 40–60 km/h | 37.3 mph · 60 km/h | differs |
| Clutch declared | — | Multi-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 40.2 gpm · 152 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 20,790–23,645 lb · 9,430–10,725 kg | 20,834 lb · 9,450 kg | differs |
| Maximum permissible mass declared | 35,274 lb · 16,000 kg | — | — |
| Wheelbase declared | 114.9 in · 2,918 mm | 114.2 in · 2,900 mm | — |
| Length declared | 191.6–238.8 in · 4,867–6,065 mm | 207.6 in · 5,274 mm | differs |
| Width declared | 100.4–117.7 in · 2,550–2,990 mm | 103.1 in · 2,620 mm | differs |
| Ground clearance declared | 17.7–20.1 in · 450–510 mm | 22.3 in · 567 mm | differs |
| Fuel tank declared | — | 533.6 qt · 505 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 8280 TTV sources
- Source: Traktorenlexikon, “Deutz-Fahr 8280 TTV”
Fendt 828 Vario sources
- Source: Traktorenlexikon, “Fendt 828 Vario”