Deutz-Fahr Agrotron 80 or SAME Explorer 75 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrotron 80 suits loader and hydraulic implement work better on this data: 83% (30.0 L/min / 7.9 gpm) more hydraulic flow and 80% (2,770 kg / 6,107 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron 80 | Explorer 75 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 80” | 55.2 kW (74.0 hp)Traktorenlexikon, “SAME Explorer 75” | Not comparableNot comparable on power at the PTO shaft: the Agrotron 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 80 and the Explorer 75 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron 80 and the Explorer 75 (DT). |
| Which pumps more oil for implements? | 66.0 L/min (17.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 80” | 36.0 L/min (9.5 gpm)Traktorenlexikon, “SAME Explorer 75” | AheadThe Deutz-Fahr Agrotron 80 has 83% more hydraulic flow (30.0 L/min / 7.9 gpm) than the SAME Explorer 75 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80” | 3,450 kg (7,606 lb)Traktorenlexikon, “SAME Explorer 75” | AheadThe Deutz-Fahr Agrotron 80 has 80% more lift (2,770 kg / 6,107 lb) than the SAME Explorer 75 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,970 kg (8,752 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80” | 3,000 kg (6,614 lb)Traktorenlexikon, “SAME Explorer 75” | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 80 is 32% heavier (970 kg / 2,138 lb) than the SAME Explorer 75 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,500 kg (14,330 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80” | — | No figureNo call on maximum permissible mass: no figure on record for the Explorer 75 (DT). |
| Which has the wider choice of gears? | 21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 80” | 12 to 16Traktorenlexikon, “SAME Explorer 75” | AheadThe Deutz-Fahr Agrotron 80 has 31% more forward gears (5 gears) than the SAME Explorer 75 (DT) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron 80 and the Explorer 75 (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 80” | 30 km/h (18.6 mph)Traktorenlexikon, “SAME Explorer 75” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 80” | 540 rpmTraktorenlexikon, “SAME Explorer 75” | AheadThe Deutz-Fahr Agrotron 80 offers 1000 rpm at the PTO, which the SAME Explorer 75 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron 80” | independentTraktorenlexikon, “SAME Explorer 75” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 80” | Two-wheel or four-wheel driveTraktorenlexikon, “SAME Explorer 75” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1997–2001 | 1985–1987 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 80 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron 80 has 83% more hydraulic flow (30.0 L/min / 7.9 gpm) than the SAME Explorer 75 (DT) (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron 80 has 80% more lift (2,770 kg / 6,107 lb) than the SAME Explorer 75 (DT) (both lift at the hitch ends, as stated by the source).
- The Deutz-Fahr Agrotron 80 is 32% heavier (970 kg / 2,138 lb) than the SAME Explorer 75 (DT) (both unladen weight, as stated by the source).
- The Deutz-Fahr Agrotron 80 has 31% more forward gears (5 gears) than the SAME Explorer 75 (DT) (both forward gears, as stated by the source).
- The Deutz-Fahr Agrotron 80 offers 1000 rpm at the PTO, which the SAME Explorer 75 (DT) does not (as stated by the sources).
- The Deutz-Fahr Agrotron 80 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrotron 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Explorer 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources