Deutz-Fahr Agrotron 80 MK3 vs VALMET 6200-4

7 material differences · fewer than 12

Tractor one

2001–2003

No measured PTO figure

Tractor two

1996–2007

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 80 MK3 and the 6200-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 80 MK3 and VALMET 6200-4, field by field
Field	Agrotron 80 MK3	6200-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Deutz BF 4 M 1012 E	VALMET 420 DSRE (44 DT)	differs
Displacement declared	3.19 L	4.40 L	+38% 6200-4
Maximum torque declared	218 lb·ft · 296 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Hydraulically operated wet ZF multi-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	21.9 gpm · 83.0 L/min	21.2 gpm · 80.3 L/min	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	9,601 lb · 4,355 kg	+43% Agrotron 80 MK3
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	8,752 lb · 3,970 kg	8,929–9,193 lb · 4,050–4,170 kg	—
Maximum permissible mass declared	14,330 lb · 6,500 kg	14,330 lb · 6,500 kg	—
Wheelbase declared	95.2 in · 2,419 mm	91.6 in · 2,327 mm	—
Length declared	157.7 in · 4,005 mm	177.7 in · 4,514 mm	+13% 6200-4
Width declared	81.1 in · 2,060 mm	85.9 in · 2,181 mm	+6% 6200-4
Height declared	107.1 in · 2,720 mm	106.3 in · 2,700 mm	—
Ground clearance declared	18.7 in · 475 mm	16.9 in · 430 mm	+10% Agrotron 80 MK3
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	190.2 qt · 180 L	167.0 qt · 158.0 L	+14% Agrotron 80 MK3

Source

Source