Deutz-Fahr Agrotron 80 MK3 or Steyr 375 Kompakt?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 80 MK3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 375 Kompakt has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrotron 80 MK3 suits loader and hydraulic implement work better on this data: 30% (19.1 L/min / 5.0 gpm) more hydraulic flow and 133% (3,550 kg / 7,826 lb) more three-point lift.
- The Deutz-Fahr Agrotron 80 MK3 suits road haulage better on this data: 35% (1,700 kg / 3,748 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron 80 MK3 | 375 Kompakt | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 55.9 kW (75.0 hp)Traktorenlexikon, “Steyr 375 Kompakt” | Not comparableNot comparable on power at the PTO shaft: the Agrotron 80 MK3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 375 Kompakt has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 80 MK3 and the 375 Kompakt. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron 80 MK3 and the 375 Kompakt. |
| Which pumps more oil for implements? | 83.0 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 63.9 L/min (16.9 gpm)Traktorenlexikon, “Steyr 375 Kompakt” | AheadThe Deutz-Fahr Agrotron 80 MK3 has 30% more hydraulic flow (19.1 L/min / 5.0 gpm) than the Steyr 375 Kompakt (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 2,670 kg (5,886 lb)Traktorenlexikon, “Steyr 375 Kompakt” | AheadThe Deutz-Fahr Agrotron 80 MK3 has 133% more lift (3,550 kg / 7,826 lb) than the Steyr 375 Kompakt (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,970 kg (8,752 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 2,950 kg (6,504 lb)Traktorenlexikon, “Steyr 375 Kompakt” | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 80 MK3 is 35% heavier (1,020 kg / 2,249 lb) than the Steyr 375 Kompakt (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,500 kg (14,330 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 4,800 kg (10,582 lb)Traktorenlexikon, “Steyr 375 Kompakt” | AheadThe Deutz-Fahr Agrotron 80 MK3 has 35% higher maximum permissible mass (1,700 kg / 3,748 lb) than the Steyr 375 Kompakt (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 16 to 32Traktorenlexikon, “Steyr 375 Kompakt” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron 80 MK3 and the 375 Kompakt. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 375 Kompakt” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 430/540/540E rpmTraktorenlexikon, “Steyr 375 Kompakt” | AheadThe Deutz-Fahr Agrotron 80 MK3 offers 1000 rpm at the PTO, which the Steyr 375 Kompakt does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the Agrotron 80 MK3 and the 375 Kompakt. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 4WDTraktorenlexikon, “Steyr 375 Kompakt” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2003 | 2004–2008 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron 80 MK3 has 30% more hydraulic flow (19.1 L/min / 5.0 gpm) than the Steyr 375 Kompakt (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron 80 MK3 has 133% more lift (3,550 kg / 7,826 lb) than the Steyr 375 Kompakt (both lift at the hitch ends, as stated by the source).
- The Deutz-Fahr Agrotron 80 MK3 is 35% heavier (1,020 kg / 2,249 lb) than the Steyr 375 Kompakt (both unladen weight, as stated by the source).
- The Deutz-Fahr Agrotron 80 MK3 has 35% higher maximum permissible mass (1,700 kg / 3,748 lb) than the Steyr 375 Kompakt (both maximum permissible mass, as stated by the source).
- The Deutz-Fahr Agrotron 80 MK3 offers 1000 rpm at the PTO, which the Steyr 375 Kompakt does not (as stated by the sources).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrotron 80 MK3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 375 Kompakt has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources