Deutz-Fahr Agrotron 80 MK3 or Massey Ferguson MF 5425 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 80 MK3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5425 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrotron 80 MK3 suits loader and hydraulic implement work better on this data: 22% (1,121 kg / 2,472 lb) more three-point lift.
- The Massey Ferguson MF 5425 (A) suits road haulage better on this data: 16% (1,060 kg / 2,337 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron 80 MK3 | MF 5425 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 55.2 kW (74.0 hp)Traktorenlexikon, “Massey Ferguson MF 5425” | Not comparableNot comparable on power at the PTO shaft: the Agrotron 80 MK3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5425 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 80 MK3 and the MF 5425 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron 80 MK3 and the MF 5425 (A). |
| Which pumps more oil for implements? | 83.0 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | — | No figureNo call on hydraulic flow: no figure on record for the MF 5425 (A). |
| Which lifts more on the three-point hitch? | 6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 5,099 kg (11,240 lb)Traktorenlexikon, “Massey Ferguson MF 5425” | AheadThe Deutz-Fahr Agrotron 80 MK3 has 22% more lift (1,121 kg / 2,472 lb) than the Massey Ferguson MF 5425 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,970 kg (8,752 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 3,945 kg (8,697 lb)Traktorenlexikon, “Massey Ferguson MF 5425” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,500 kg (14,330 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 7,560 kg (16,667 lb)Traktorenlexikon, “Massey Ferguson MF 5425” | AheadThe Massey Ferguson MF 5425 (A) has 16% higher maximum permissible mass (1,060 kg / 2,337 lb) than the Deutz-Fahr Agrotron 80 MK3 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 16Traktorenlexikon, “Massey Ferguson MF 5425” | AheadThe Deutz-Fahr Agrotron 80 MK3 has 31% more forward gears (5 gears) than the Massey Ferguson MF 5425 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron 80 MK3 and the MF 5425 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5425” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5425” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the Agrotron 80 MK3 and the MF 5425 (A). |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 5425” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2003 | 2003–2011 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron 80 MK3 has 22% more lift (1,121 kg / 2,472 lb) than the Massey Ferguson MF 5425 (A) (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson MF 5425 (A) has 16% higher maximum permissible mass (1,060 kg / 2,337 lb) than the Deutz-Fahr Agrotron 80 MK3 (both maximum permissible mass, as stated by the source).
- The Deutz-Fahr Agrotron 80 MK3 has 31% more forward gears (5 gears) than the Massey Ferguson MF 5425 (A) (both forward gears, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrotron 80 MK3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5425 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources