Deutz-Fahr Agrotron 80 MK3 vs Massey Ferguson MF 4235 (A)

8 material differences · fewer than 12

Tractor one

2001–2003

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 80 MK3 and the MF 4235 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 80 MK3 and Massey Ferguson MF 4235 (A), field by field
Field	Agrotron 80 MK3	MF 4235 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Deutz BF 4 M 1012 E	Perkins 4.41	differs
Displacement declared	3.19 L	4.08 L	+28% MF 4235 (A)
Maximum torque declared	218 lb·ft · 296 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Hydraulically operated wet ZF multi-plate clutch	Pedal operated, dry and air cooled single disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	21.9 gpm · 83.0 L/min	—	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	6,856 lb · 3,110 kg	+100% Agrotron 80 MK3
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,752 lb · 3,970 kg	7,915 lb · 3,590 kg	+11% Agrotron 80 MK3
Maximum permissible mass declared	14,330 lb · 6,500 kg	15,432 lb · 7,000 kg	+8% MF 4235 (A)
Wheelbase declared	95.2 in · 2,419 mm	92.5 in · 2,350 mm	—
Length declared	157.7 in · 4,005 mm	157.9 in · 4,010 mm	—
Width declared	81.1 in · 2,060 mm	78.3 in · 1,990 mm	—
Height declared	107.1 in · 2,720 mm	103.7 in · 2,635 mm	—
Ground clearance declared	18.7 in · 475 mm	11.4 in · 290 mm	+64% Agrotron 80 MK3
Fuel tank declared	190.2 qt · 180 L	196.5 qt · 186.0 L	—

Source

Source