4 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 6150from 2012No measured PTO figureTractor twoMassey Ferguson MF 74752004–2012No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 6150 and the MF 7475 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Agrotron 6150 | MF 7475 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 135 hp | 133.3 hp | — |
| Engine declared | Deutz AG TCD 6.1 L06 4V | Perkins 1106 C-60 TA | differs |
| Displacement declared | 6.06 L | — | — |
| Maximum torque declared | 446 lb·ft · 605 N·m | 385 lb·ft · 522 N·m | +16% Agrotron 6150 |
| Transmission | |||
| Top speed declared | — | 24.9–31.1 mph · 40–50 km/h | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 21.9 gpm · 83.0 L/min | 31.7 gpm · 119.9 L/min | +44% MF 7475 |
| Pressure declared | — | 2,176 psi · 150 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,655 lb · 5,740 kg | 13,779 lb · 6,250 kg | +9% MF 7475 |
| Maximum permissible mass declared | — | 20,944 lb · 9,500 kg | — |
| Wheelbase declared | 104.2 in · 2,647 mm | 109.4 in · 2,780 mm | — |
| Length declared | 184.5 in · 4,686 mm | 187.0 in · 4,750 mm | — |
| Width declared | 98.4 in · 2,500 mm | 96.5 in · 2,450 mm | — |
| Ground clearance declared | — | 18.0 in · 457 mm | — |
| Fuel tank declared | 295.9 qt · 280 L | 285.3 qt · 270.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 6150 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6150”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 7250”
Massey Ferguson MF 7475 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 7475”
- Source: Traktorenlexikon, “Massey Ferguson MF 7465”