7 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrotron 6.451995–1997No measured PTO figureTractor twoInternational Harvester 63881981–1984No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (47%); they were not built in overlapping years (1995–1997; 1981–1984). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 6.45 and International Harvester 6388, field by field
FieldAgrotron 6.456388Gap
Engine
Engine power, claimed claimed143.1 hp130.2 hp+10% Agrotron 6.45
Engine declaredDeutz BF6M 1013 EINTERNATIONAL HARVESTER DT-436 Bdiffers
Displacement declared7.15 L7.15 L—
Maximum torque declared427 lb·ft · 579 N·m——
Transmission
Top speed declared18.6–31.1 mph · 30–50 km/h18.6 mph · 30 km/hdiffers
Clutch declaredElectro-hydraulically operated wet ZF multi-disc clutch——
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Hydraulic control declaredLoad sensing——
Pump flow declared21.9 gpm · 83.0 L/min18.0 gpm · 68.1 L/min+22% Agrotron 6.45
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared11,883 lb · 5,390 kg17,421 lb · 7,902 kg+47% 6388
Wheelbase declared108.9 in · 2,767 mm110.0 in · 2,794 mm—
Length declared184.3 in · 4,680 mm227.0 in · 5,766 mm+23% 6388
Width declared79.1 in · 2,008 mm101.6 in · 2,581 mm+29% 6388
Height, over the cab declared116.3 in · 2,955 mm114.7 in · 2,913 mm—
Ground clearance declared22.8 in · 580 mm22.0 in · 559 mm—
Fuel tank declared274.7 qt · 260 L356.1–555.8 qt · 337.0–526.0 Ldiffers

Deutz-Fahr Agrotron 6.45 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6.45”
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”

International Harvester 6388 sources

Source
  • Source: Traktorenlexikon, “IHC 6388”
  • Source: Traktorenlexikon, “IHC 5088”