Deutz-Fahr Agrotron 6.30 or New Holland T 6060 Elite (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 6.30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6060 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 6.30 and New Holland T 6060 Elite (Traktorenlexikon), with the call on each
QuestionAgrotron 6.30T 6060 EliteCall
Which puts more power through the PTO shaft?97.2 kW (130.3 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”97.1 kW (130.2 hp)Traktorenlexikon, “New Holland T 6060 Elite”Not comparableNot comparable on power at the PTO shaft: the Agrotron 6.30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6060 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 6.30 and the T 6060 Elite.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 6.30 and the T 6060 Elite.
Which pumps more oil for implements?82.8 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”103.1 L/min (27.2 gpm)Traktorenlexikon, “New Holland T 6060 Elite”AheadThe New Holland T 6060 Elite has 25% more hydraulic flow (20.3 L/min / 5.4 gpm) than the Deutz-Fahr Agrotron 6.30 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”7,864 kg (17,337 lb)Traktorenlexikon, “New Holland T 6060 Elite”AheadThe Deutz-Fahr Agrotron 6.30 has 17% more lift (1,376 kg / 3,034 lb) than the New Holland T 6060 Elite (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,360 kg (11,817 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”5,730 kg (12,632 lb)Traktorenlexikon, “New Holland T 6060 Elite”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “New Holland T 6060 Elite”No figureNo call on maximum permissible mass: no figure on record for the Agrotron 6.30.
Which has the wider choice of gears?20 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”16 to 17Traktorenlexikon, “New Holland T 6060 Elite”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 6.30 and the T 6060 Elite.
Which is faster on the road?30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T 6060 Elite”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 6.30”540/540E/1000 rpmTraktorenlexikon, “New Holland T 6060 Elite”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 6.30”No figureNo call on PTO independence: not stated for the T 6060 Elite.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 6.30”4WDTraktorenlexikon, “New Holland T 6060 Elite”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–19972007–2012Ahead (a fact, not an advantage)The New Holland T 6060 Elite is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland T 6060 Elite has 25% more hydraulic flow (20.3 L/min / 5.4 gpm) than the Deutz-Fahr Agrotron 6.30 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 6.30 has 17% more lift (1,376 kg / 3,034 lb) than the New Holland T 6060 Elite (both lift at the hitch ends, as stated by the source).
  • The New Holland T 6060 Elite is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 6.30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6060 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources