Deutz-Fahr Agrotron 6.30 or Massey Ferguson MF 3635 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 6.30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3635 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 6.30 suits loader and hydraulic implement work better on this data: 36% (2,440 kg / 5,379 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 6.30 and Massey Ferguson MF 3635 (A), with the call on each
QuestionAgrotron 6.30MF 3635 (A)Call
Which puts more power through the PTO shaft?97.2 kW (130.3 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”97.2 kW (130.3 hp)Traktorenlexikon, “Massey Ferguson MF 3635”Not comparableNot comparable on power at the PTO shaft: the Agrotron 6.30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3635 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 6.30 and the MF 3635 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 6.30 and the MF 3635 (A).
Which pumps more oil for implements?82.8 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”No figureNo call on hydraulic flow: no figure on record for the MF 3635 (A).
Which lifts more on the three-point hitch?9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”6,800 kg (14,991 lb)Traktorenlexikon, “Massey Ferguson MF 3635”AheadThe Deutz-Fahr Agrotron 6.30 has 36% more lift (2,440 kg / 5,379 lb) than the Massey Ferguson MF 3635 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,360 kg (11,817 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”5,945 kg (13,106 lb)Traktorenlexikon, “Massey Ferguson MF 3635”Ahead (a fact, not an advantage)The Massey Ferguson MF 3635 (A) is 11% heavier (585 kg / 1,290 lb) than the Deutz-Fahr Agrotron 6.30 (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “Massey Ferguson MF 3635”No figureNo call on maximum permissible mass: no figure on record for the Agrotron 6.30.
Which has the wider choice of gears?20 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”16 to 32Traktorenlexikon, “Massey Ferguson MF 3635”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 6.30 and the MF 3635 (A).
Which is faster on the road?30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 6.30”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3635”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 6.30”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3635”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 6.30”independentTraktorenlexikon, “Massey Ferguson MF 3635”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 6.30”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3635”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–19971990–1995Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 6.30 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 6.30 has 36% more lift (2,440 kg / 5,379 lb) than the Massey Ferguson MF 3635 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 3635 (A) is 11% heavier (585 kg / 1,290 lb) than the Deutz-Fahr Agrotron 6.30 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrotron 6.30 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 6.30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3635 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources