Deutz-Fahr Agrotron 6.20 or New Holland TM 125 (Traktorenlexikon)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 6.20 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron 6.20 | TM 125 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 84.6 kW (113.5 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 84.6 kW (113.5 hp)Traktorenlexikon, “New Holland TM125” | Not comparableNot comparable on power at the PTO shaft: the Agrotron 6.20 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 6.20 and the TM 125. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron 6.20 and the TM 125. |
| Which pumps more oil for implements? | 82.8 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 116.9 L/min (30.9 gpm)Traktorenlexikon, “New Holland TM125” | AheadThe New Holland TM 125 has 41% more hydraulic flow (34.1 L/min / 9.0 gpm) than the Deutz-Fahr Agrotron 6.20 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 6,560 kg (14,462 lb)Traktorenlexikon, “New Holland TM125” | AheadThe Deutz-Fahr Agrotron 6.20 has 41% more lift (2,680 kg / 5,908 lb) than the New Holland TM 125 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 5,360 kg (11,817 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 5,337 kg (11,766 lb)Traktorenlexikon, “New Holland TM125” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 8,500 kg (18,739 lb)Traktorenlexikon, “New Holland TM125” | No figureNo call on maximum permissible mass: no figure on record for the Agrotron 6.20. |
| Which has the wider choice of gears? | 15 to 18Traktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 18 to 24Traktorenlexikon, “New Holland TM125” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron 6.20 and the TM 125. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM125” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 540/540E/1000 rpmTraktorenlexikon, “New Holland TM125” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron 6.20” | independentTraktorenlexikon, “New Holland TM125” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 6.20” | 4WDTraktorenlexikon, “New Holland TM125” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–1997 | 1999–2002 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland TM 125 has 41% more hydraulic flow (34.1 L/min / 9.0 gpm) than the Deutz-Fahr Agrotron 6.20 (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron 6.20 has 41% more lift (2,680 kg / 5,908 lb) than the New Holland TM 125 (both lift at the hitch ends, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrotron 6.20 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources