Deutz-Fahr Agrotron 6.20 vs John Deere 6520
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the Agrotron 6.20 and the 6520 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Agrotron 6.20 | 6520 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 113.5 hp | — |
| Engine declared | Deutz BF6M 1013 E | John Deere PowrTech 6.068 HLA-V2 or 6.068 HL-4V/CR | differs |
| Displacement declared | 7.15 L | 6.79 L | +5% Agrotron 6.20 |
| Maximum torque declared | 340 lb·ft · 461 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 21.9 gpm · 82.8 L/min | — | — |
| Three-point lift at ends declared | 20,371 lb · 9,240 kg | 14,881 lb · 6,750 kg | +37% Agrotron 6.20 |
| Rear PTO speeds declared | 540/1000 rpm | 540E/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,817 lb · 5,360 kg | 11,199–11,773 lb · 5,080–5,340 kg | differs |
| Maximum permissible mass declared | — | 18,739 lb · 8,500 kg | — |
| Wheelbase declared | 108.9 in · 2,767 mm | 104.3 in · 2,650 mm | — |
| Length declared | 184.3 in · 4,680 mm | 186.1 in · 4,728 mm | — |
| Width declared | 79.1 in · 2,008 mm | 91.2 in · 2,316 mm | +15% 6520 |
| Height declared | 116.3 in · 2,955 mm | 112.5 in · 2,858 mm | — |
| Ground clearance declared | 22.8 in · 580 mm | 22.4 in · 570 mm | — |
| Fuel tank declared | 285.3 qt · 270 L | 218.7 qt · 207.0 L | +30% Agrotron 6.20 |
Deutz-Fahr Agrotron 6.20 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6.20”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”
John Deere 6520 sources
Source
- Source: Traktorenlexikon, “John Deere 6520”