Deutz-Fahr Agrotron 6.20 vs Fendt Favorit 511 C

9 material differences · fewer than 12

Tractor one

1995–1997

No measured PTO figure

Tractor two

1994–1999

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 6.20 and the Favorit 511 C → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 6.20 and Fendt Favorit 511 C, field by field
Field	Agrotron 6.20	Favorit 511 C	Gap
Engine
Engine power, claimed claimed	113.5 hp	112.9 hp	—
Engine declared	Deutz BF6M 1013 E	MWM D 226	differs
Displacement declared	7.15 L	6.23 L	+15% Agrotron 6.20
Maximum torque declared	340 lb·ft · 461 N·m	336 lb·ft · 456 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Hydraulics & hitch
Pump flow declared	21.9 gpm · 82.8 L/min	27.5 gpm · 104.0 L/min	+26% Favorit 511 C
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	20,371 lb · 9,240 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,817 lb · 5,360 kg	11,684 lb · 5,300 kg	—
Wheelbase declared	108.9 in · 2,767 mm	101.9 in · 2,589 mm	+7% Agrotron 6.20
Length declared	184.3 in · 4,680 mm	174.6 in · 4,435 mm	+6% Agrotron 6.20
Width declared	79.1 in · 2,008 mm	93.7 in · 2,380 mm	+19% Favorit 511 C
Height declared	116.3 in · 2,955 mm	111.0 in · 2,820 mm	—
Ground clearance declared	22.8 in · 580 mm	21.1 in · 536 mm	+8% Agrotron 6.20
Turning radius, braked declared	—	14.4 ft · 4.40 m	—
Fuel tank declared	285.3 qt · 270 L	—	—

Source

Source