Deutz-Fahr Agrotron 6.15 or New Holland T 6030 RC/PC?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 6.15 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6030 RC/PC has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 6.15 and New Holland T 6030 RC/PC, with the call on each
QuestionAgrotron 6.15T 6030 RC/PCCall
Which puts more power through the PTO shaft?85.8 kW (115.1 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”86.1 kW (115.5 hp)Traktorenlexikon, “New Holland T6030 RC und PC”Not comparableNot comparable on power at the PTO shaft: the Agrotron 6.15 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6030 RC/PC has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 6.15 and the T 6030 RC/PC.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agrotron 6.15 and the T 6030 RC/PC.
Which pumps more oil for implements?82.3 L/min (21.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”—No figureNo call on hydraulic flow: no figure on record for the T 6030 RC/PC.
Which lifts more on the three-point hitch?—8,257 kg (18,204 lb)Traktorenlexikon, “New Holland T6030 RC und PC”No figureNo call on three-point lift: no figure on record for the Agrotron 6.15.
Which is heavier, for traction?5,190 kg (11,442 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”6,075 kg (13,393 lb)Traktorenlexikon, “New Holland T6030 RC und PC”Ahead (a fact, not an advantage)The New Holland T 6030 RC/PC is 17% heavier (885 kg / 1,951 lb) than the Deutz-Fahr Agrotron 6.15 (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the Agrotron 6.15 and the T 6030 RC/PC.
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”18 to 19Traktorenlexikon, “New Holland T6030 RC und PC”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Agrotron 6.15 and the T 6030 RC/PC.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T6030 RC und PC”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 6.15”540/540E/1000 rpmTraktorenlexikon, “New Holland T6030 RC und PC”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 6.15”—No figureNo call on PTO independence: not stated for the T 6030 RC/PC.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 6.15”4WDTraktorenlexikon, “New Holland T6030 RC und PC”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–19972007–2012Ahead (a fact, not an advantage)The New Holland T 6030 RC/PC is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland T 6030 RC/PC is 17% heavier (885 kg / 1,951 lb) than the Deutz-Fahr Agrotron 6.15 (both unladen weight, as stated by the source).
  • The New Holland T 6030 RC/PC is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 6.15 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6030 RC/PC has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources