Deutz-Fahr Agrotron 6.00 or New Holland TD 95 D 2004-2008?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 6.00 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 95 D 2004-2008 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 6.00 suits loader and hydraulic implement work better on this data: 41% (23.9 L/min / 6.3 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 6.00 and New Holland TD 95 D 2004-2008, with the call on each
QuestionAgrotron 6.00TD 95 D 2004-2008Call
Which puts more power through the PTO shaft?70.8 kW (94.9 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 6.00”71.3 kW (95.6 hp)Traktorenlexikon, “New Holland TD 95 D 2004-2008”Not comparableNot comparable on power at the PTO shaft: the Agrotron 6.00 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 95 D 2004-2008 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 6.00 and the TD 95 D 2004-2008.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agrotron 6.00 and the TD 95 D 2004-2008.
Which pumps more oil for implements?82.3 L/min (21.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 6.00”58.4 L/min (15.4 gpm)Traktorenlexikon, “New Holland TD 95 D 2004-2008”AheadThe Deutz-Fahr Agrotron 6.00 has 41% more hydraulic flow (23.9 L/min / 6.3 gpm) than the New Holland TD 95 D 2004-2008 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?—3,565 kg (7,859 lb)Traktorenlexikon, “New Holland TD 95 D 2004-2008”No figureNo call on three-point lift: no figure on record for the Agrotron 6.00.
Which is heavier, for traction?5,010 kg (11,045 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.00”3,155 kg (6,956 lb)Traktorenlexikon, “New Holland TD 95 D 2004-2008”Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 6.00 is 59% heavier (1,855 kg / 4,090 lb) than the New Holland TD 95 D 2004-2008 (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,500 kg (18,739 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.00”—No figureNo call on maximum permissible mass: no figure on record for the TD 95 D 2004-2008.
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr Agrotron 6.00”12 to 20Traktorenlexikon, “New Holland TD 95 D 2004-2008”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?—YesTraktorenlexikon, “New Holland TD 95 D 2004-2008”No figureNo call on a creeper range: not stated for the Agrotron 6.00.
Which is faster on the road?30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 6.00”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TD 95 D 2004-2008”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 6.00”540 rpm / 1000 rpmTraktorenlexikon, “New Holland TD 95 D 2004-2008”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 6.00”—No figureNo call on PTO independence: not stated for the TD 95 D 2004-2008.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 6.00”Two-wheel or four-wheel driveTraktorenlexikon, “New Holland TD 95 D 2004-2008”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–19972004–2008Ahead (a fact, not an advantage)The New Holland TD 95 D 2004-2008 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 6.00 has 41% more hydraulic flow (23.9 L/min / 6.3 gpm) than the New Holland TD 95 D 2004-2008 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 6.00 is 59% heavier (1,855 kg / 4,090 lb) than the New Holland TD 95 D 2004-2008 (both unladen weight, as stated by the source).
  • The New Holland TD 95 D 2004-2008 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 6.00 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 95 D 2004-2008 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources