9 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 6.001995–1997No measured PTO figureTractor twoJ.I. Case 1594 (DT)1984–1985No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 6.00 and the 1594 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agrotron 6.00 | 1594 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 94.9 hp | 95.6 hp | — |
| Engine declared | Deutz. BF6M 1012 E | DAVID BROWN AD 6/55 | differs |
| Displacement declared | 4.79 L | 5.39 L | +13% 1594 (DT) |
| Maximum torque declared | 280 lb·ft · 380 N·m | 243 lb·ft · 329 N·m | +16% Agrotron 6.00 |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 21.7 gpm · 82.3 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,045 lb · 5,010 kg | 9,345 lb · 4,239 kg | +18% Agrotron 6.00 |
| Maximum permissible mass declared | 18,739 lb · 8,500 kg | — | — |
| Wheelbase declared | 104.2 in · 2,647 mm | 100.0 in · 2,540 mm | — |
| Length declared | 178.0 in · 4,520 mm | 167.3 in · 4,250 mm | +6% Agrotron 6.00 |
| Width declared | 90.9 in · 2,310 mm | 78.0 in · 1,981 mm | +17% Agrotron 6.00 |
| Ground clearance declared | 20.5 in · 520 mm | 16.0 in · 406 mm | +28% Agrotron 6.00 |
| Turning radius, braked declared | — | 12.3 ft · 3.76 m | — |
| Fuel tank declared | 274.7 qt · 260 L | 143.7 qt · 136.0 L | +91% Agrotron 6.00 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 6.00 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6.00”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 105 MK3”
J.I. Case 1594 (DT) sources
- Source: Traktorenlexikon, “Case 1594”