Deutz-Fahr Agrotron 4.95 or WHITE 2-88?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 4.95 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2-88 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The WHITE 2-88 suits loader and hydraulic implement work better on this data: 17% (11.2 L/min / 3.0 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 4.95 and WHITE 2-88, with the call on each
QuestionAgrotron 4.952-88Call
Which puts more power through the PTO shaft?70.8 kW (94.9 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”70.6 kW (94.7 hp)Traktorenlexikon, “White 2-88”Not comparableNot comparable on power at the PTO shaft: the Agrotron 4.95 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2-88 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 4.95 and the 2-88.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 4.95 and the 2-88.
Which pumps more oil for implements?64.5 L/min (17.0 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”75.7 L/min (20.0 gpm)Traktorenlexikon, “White 2-88”AheadThe WHITE 2-88 has 17% more hydraulic flow (11.2 L/min / 3.0 gpm) than the Deutz-Fahr Agrotron 4.95 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”2,722 kg (6,001 lb)Traktorenlexikon, “White 2-88”Not comparableNot comparable on three-point lift: the Agrotron 4.95: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”); the 2-88: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 2-88”) — not the same quantity, basis and condition.
Which is heavier, for traction?4,220 kg (9,304 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”5,300 kg (11,684 lb)Traktorenlexikon, “White 2-88”Ahead (a fact, not an advantage)The WHITE 2-88 is 26% heavier (1,080 kg / 2,381 lb) than the Deutz-Fahr Agrotron 4.95 (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”No figureNo call on maximum permissible mass: no figure on record for the 2-88.
Which has the wider choice of gears?21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”18Traktorenlexikon, “White 2-88”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 4.95 and the 2-88.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”30 km/h (18.6 mph)Traktorenlexikon, “White 2-88”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 4.95”540/1000 rpmTraktorenlexikon, “White 2-88”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 4.95”No figureNo call on PTO independence: not stated for the 2-88.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 4.95”Two-wheel or four-wheel driveTraktorenlexikon, “White 2-88”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–19971982–1987Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 4.95 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The WHITE 2-88 has 17% more hydraulic flow (11.2 L/min / 3.0 gpm) than the Deutz-Fahr Agrotron 4.95 (both pump flow, as stated by the source).
  • The WHITE 2-88 is 26% heavier (1,080 kg / 2,381 lb) than the Deutz-Fahr Agrotron 4.95 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrotron 4.95 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 4.95 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2-88 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the Agrotron 4.95: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron 4.95”); the 2-88: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 2-88”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources