Deutz-Fahr Agrotron 4.80 vs Massey Ferguson MF 4235 (A)

6 material differences · fewer than 12

Tractor one

1995–1997

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 4.80 and the MF 4235 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 4.80 and Massey Ferguson MF 4235 (A), field by field
Field	Agrotron 4.80	MF 4235 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Deutz BF 4 M 1012 E	Perkins 4.41	differs
Displacement declared	3.19 L	4.08 L	+28% MF 4235 (A)
Maximum torque declared	214 lb·ft · 290 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal operated, dry and air cooled single disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	17.4 gpm · 66.0 L/min	—	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	6,856 lb · 3,110 kg	+100% Agrotron 4.80
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,752 lb · 3,970 kg	7,915 lb · 3,590 kg	+11% Agrotron 4.80
Maximum permissible mass declared	14,330 lb · 6,500 kg	15,432 lb · 7,000 kg	+8% MF 4235 (A)
Wheelbase declared	95.2 in · 2,419 mm	92.5 in · 2,350 mm	—
Length declared	157.7 in · 4,005 mm	157.9 in · 4,010 mm	—
Width declared	79.1 in · 2,008 mm	78.3 in · 1,990 mm	—
Height declared	107.1 in · 2,720 mm	103.7 in · 2,635 mm	—
Ground clearance declared	18.7 in · 475 mm	11.4 in · 290 mm	+64% Agrotron 4.80
Fuel tank declared	190.2 qt · 180 L	196.5 qt · 186.0 L	—

Source

Source