Deutz-Fahr Agrotron 4.80 vs Fendt Farmer 304 LSA

6 material differences · fewer than 12

Tractor one

1995–1997

No measured PTO figure

Tractor two

1990–1998

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 4.80 and the Farmer 304 LSA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 4.80 and Fendt Farmer 304 LSA, field by field
Field	Agrotron 4.80	Farmer 304 LSA	Gap
Engine
Engine power, claimed claimed	74.0 hp	74 hp	—
Engine declared	Deutz BF 4 M 1012 E	MWM TD 226.B-3	differs
Displacement declared	3.19 L	3.12 L	—
Maximum torque declared	214 lb·ft · 290 N·m	210 lb·ft · 285 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	single-disc dry clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	17.4 gpm · 66.0 L/min	—	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/750/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,752 lb · 3,970 kg	7,738 lb · 3,510 kg	+13% Agrotron 4.80
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	95.2 in · 2,419 mm	84.7 in · 2,152 mm	+12% Agrotron 4.80
Length declared	157.7 in · 4,005 mm	153.5 in · 3,900 mm	—
Width declared	79.1 in · 2,008 mm	77.8 in · 1,975 mm	—
Height declared	107.1 in · 2,720 mm	104.3 in · 2,650 mm	—
Ground clearance declared	18.7 in · 475 mm	16.9 in · 430 mm	+10% Agrotron 4.80
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	190.2 qt · 180 L	84.5 qt · 80 L	+125% Agrotron 4.80

Source

Source