Deutz-Fahr Agrotron 4.70 or New Holland TD 70 D (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 4.70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 70 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 4.70 suits loader and hydraulic implement work better on this data: 53% (23.0 L/min / 6.1 gpm) more hydraulic flow and 112% (3,282 kg / 7,236 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 4.70 and New Holland TD 70 D (A), with the call on each
QuestionAgrotron 4.70TD 70 D (A)Call
Which puts more power through the PTO shaft?50.7 kW (68.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”50.7 kW (68.0 hp)Traktorenlexikon, “New Holland TD 70 D”Not comparableNot comparable on power at the PTO shaft: the Agrotron 4.70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 70 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 4.70 and the TD 70 D (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agrotron 4.70 and the TD 70 D (A).
Which pumps more oil for implements?66.0 L/min (17.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”43.0 L/min (11.4 gpm)Traktorenlexikon, “New Holland TD 70 D”AheadThe Deutz-Fahr Agrotron 4.70 has 53% more hydraulic flow (23.0 L/min / 6.1 gpm) than the New Holland TD 70 D (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”2,938 kg (6,477 lb)Traktorenlexikon, “New Holland TD 70 D”AheadThe Deutz-Fahr Agrotron 4.70 has 112% more lift (3,282 kg / 7,236 lb) than the New Holland TD 70 D (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,890 kg (8,576 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”2,726 kg (6,010 lb)Traktorenlexikon, “New Holland TD 70 D”Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 4.70 is 43% heavier (1,164 kg / 2,566 lb) than the New Holland TD 70 D (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,000 kg (13,228 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”—No figureNo call on maximum permissible mass: no figure on record for the TD 70 D (A).
Which has the wider choice of gears?21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”12 to 20Traktorenlexikon, “New Holland TD 70 D”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Agrotron 4.70 and the TD 70 D (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TD 70 D”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 4.70”540/540E/1000 rpmTraktorenlexikon, “New Holland TD 70 D”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 4.70”independentTraktorenlexikon, “New Holland TD 70 D”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 4.70”Two-wheel or four-wheel driveTraktorenlexikon, “New Holland TD 70 D”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–19972002–2008Ahead (a fact, not an advantage)The New Holland TD 70 D (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 4.70 has 53% more hydraulic flow (23.0 L/min / 6.1 gpm) than the New Holland TD 70 D (A) (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 4.70 has 112% more lift (3,282 kg / 7,236 lb) than the New Holland TD 70 D (A) (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr Agrotron 4.70 is 43% heavier (1,164 kg / 2,566 lb) than the New Holland TD 70 D (A) (both unladen weight, as stated by the source).
  • The New Holland TD 70 D (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 4.70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 70 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources