Deutz-Fahr Agrotron 260 MK3 vs John Deere 8410 T

11 material differences · fewer than 12

Tractor one

2001–2003

No measured PTO figure

Tractor two

2000–2002

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 260 MK3 and the 8410 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 260 MK3 and John Deere 8410 T, field by field
Field	Agrotron 260 MK3	8410 T	Gap
Engine
Engine power, claimed claimed	256.7 hp	266.5 hp	—
Engine declared	Deutz BF6M 1013 FC	John Deere-PowerTech 6.081 HRW-18	differs
Displacement declared	7.15 L	8.13 L	+14% 8410 T
Maximum torque declared	774 lb·ft · 1,050 N·m	844 lb·ft · 1,144 N·m	+9% 8410 T
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Hydraulically operated wet ZF multi-plate clutch	Pedal operated hydraulic wet John Deere multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	31.8 gpm · 120.3 L/min	31.4 gpm · 118.9 L/min	—
Pressure declared	2,770 psi · 191 bar	2,944 psi · 203 bar	+6% 8410 T
Three-point lift at ends declared	23,149 lb · 10,500 kg	—	—
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	18,409 lb · 8,350 kg	26,378 lb · 11,965 kg	+43% 8410 T
Maximum permissible mass declared	30,865 lb · 14,000 kg	31,500 lb · 14,288 kg	—
Wheelbase declared	121.6 in · 3,089 mm	89.0 in · 2,260 mm	+37% Agrotron 260 MK3
Length declared	211.0 in · 5,360 mm	216.0 in · 5,487 mm	—
Width declared	105.1 in · 2,670 mm	134.0 in · 3,404 mm	+27% 8410 T
Height declared	127.0 in · 3,225 mm	123.0 in · 3,125 mm	—
Ground clearance declared	21.3 in · 540 mm	14.2 in · 360 mm	+50% Agrotron 260 MK3
Fuel tank declared	581.2 qt · 550 L	519.9 qt · 492.0 L	+12% Agrotron 260 MK3

Source

Source