9 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 2052002–2003No measured PTO figureTractor twoJohn Deere 81101999–2002No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 205 and the 8110 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Agrotron 205 | 8110 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 193 hp | 192.4 hp | — |
| Engine declared | Deutz BF6M 1013 EC | John Deere-PowerTech 6.081 HRW-11 | differs |
| Displacement declared | 7.15 L | 8.13 L | +14% 8110 |
| Maximum torque declared | 639 lb·ft · 867 N·m | 586 lb·ft · 794 N·m | +9% Agrotron 205 |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulically operated multi-plate clutch running in an oil bath | Pedal operated hydraulic wet John Deere multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | — | 31.8 gpm · 120.4 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | 2,683 psi · 185 bar | +8% Agrotron 205 |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,503 lb · 9,300 kg | 19,346 lb · 8,775 kg | +6% Agrotron 205 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 121.7 in · 3,090 mm | 116.1 in · 2,950 mm | — |
| Length declared | 212.2 in · 5,390 mm | 216.0 in · 5,487 mm | — |
| Width declared | — | 118.6–127.3 in · 3,012–3,233 mm | — |
| Ground clearance declared | — | 16.5 in · 420 mm | — |
| Fuel tank declared | 401.5 qt · 380 L | 540.0 qt · 511.0 L | +34% 8110 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 205 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 205 MK3”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 200”
John Deere 8110 sources
- Source: Traktorenlexikon, “John Deere 8110”
- Source: OECD test report 1931, 2000