Deutz-Fahr Agrotron 200 or Fendt Favorit 920 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 200 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 920 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Favorit 920 Vario suits road haulage better on this data: 17% (2,000 kg / 4,409 lb) more maximum permissible mass and 25% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 200 and Fendt Favorit 920 Vario, with the call on each
QuestionAgrotron 200Favorit 920 VarioCall
Which puts more power through the PTO shaft?147.2 kW (197.4 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 200”147 kW (197 hp)Traktorenlexikon, “Fendt Favorit 920 Vario”Not comparableNot comparable on power at the PTO shaft: the Agrotron 200 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 920 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 200 and the Favorit 920 Vario.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 200 and the Favorit 920 Vario.
Which pumps more oil for implements?115.0 L/min (30.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 200”No figureNo call on hydraulic flow: no figure on record for the Favorit 920 Vario.
Which lifts more on the three-point hitch?10,000 kg (22,046 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 200”9,180 kg (20,238 lb)Traktorenlexikon, “Fendt Favorit 920 Vario”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?6,900 kg (15,212 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 200”8,090 kg (17,835 lb)Traktorenlexikon, “Fendt Favorit 920 Vario”Ahead (a fact, not an advantage)The Fendt Favorit 920 Vario is 17% heavier (1,190 kg / 2,624 lb) than the Deutz-Fahr Agrotron 200 (both unladen weight, as stated by the source).
Which may carry more ballast and load?12,000 kg (26,455 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 200”14,000 kg (30,865 lb)Traktorenlexikon, “Fendt Favorit 920 Vario”AheadThe Fendt Favorit 920 Vario has 17% higher maximum permissible mass (2,000 kg / 4,409 lb) than the Deutz-Fahr Agrotron 200 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?18 forwardTraktorenlexikon, “Deutz-Fahr Agrotron 200”Stepless (CVT)Traktorenlexikon, “Fendt Favorit 920 Vario”DifferTransmissions differ in kind: the Deutz-Fahr Agrotron 200 has 18 forward gears and the Fendt Favorit 920 Vario is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 200 and the Favorit 920 Vario.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 200”50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 920 Vario”AheadThe Fendt Favorit 920 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrotron 200 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 200”540 rpm / 750 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 920 Vario”AheadThe Fendt Favorit 920 Vario offers 750 rpm at the PTO, which the Deutz-Fahr Agrotron 200 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 200”No figureNo call on PTO independence: not stated for the Favorit 920 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 200”4WDTraktorenlexikon, “Fendt Favorit 920 Vario”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20001997–2002EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Favorit 920 Vario is 17% heavier (1,190 kg / 2,624 lb) than the Deutz-Fahr Agrotron 200 (both unladen weight, as stated by the source).
  • The Fendt Favorit 920 Vario has 17% higher maximum permissible mass (2,000 kg / 4,409 lb) than the Deutz-Fahr Agrotron 200 (both maximum permissible mass, as stated by the source).
  • The Fendt Favorit 920 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrotron 200 (both top speed forward, as stated by the source).
  • The Fendt Favorit 920 Vario offers 750 rpm at the PTO, which the Deutz-Fahr Agrotron 200 does not (as stated by the sources).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Deutz-Fahr Agrotron 200 has 18 forward gears and the Fendt Favorit 920 Vario is stepless (CVT) — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agrotron 200 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 920 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources