11 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 200 MK32001–2004No measured PTO figureTractor twoFendt 720 Variofrom 2011No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 200 MK3 and the 720 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agrotron 200 MK3 | 720 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 197.4 hp | 198 hp | — |
| Engine declared | Deutz BF6M 1013 E | Deutz TCD 6.1 L6 4V | differs |
| Displacement declared | 7.15 L | 6.06 L | +18% Agrotron 200 MK3 |
| Maximum torque declared | 558 lb·ft · 756 N·m | 662 lb·ft · 897 N·m | +19% 720 Vario |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 31.1 mph · 50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 31.1 gpm · 117.9 L/min | — | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 16,446 lb · 7,460 kg | 17,417–17,593 lb · 7,900–7,980 kg | differs |
| Maximum permissible mass declared | 26,455 lb · 12,000 kg | 29,762 lb · 13,500 kg | +13% 720 Vario |
| Wheelbase declared | 119.3 in · 3,030 mm | 109.1–109.6 in · 2,770–2,783 mm | differs |
| Length declared | 187.3 in · 4,757 mm | 205.8–206.3 in · 5,227–5,240 mm | differs |
| Width declared | 97.6 in · 2,480 mm | 100.4 in · 2,550 mm | — |
| Ground clearance declared | 23.6 in · 600 mm | 19.9–21.7 in · 506–552 mm | differs |
| Fuel tank declared | 401.5 qt · 380 L | 422.7 qt · 400 L | +5% 720 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 200 MK3 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 200 MK3”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”
Fendt 720 Vario sources
- Source: Traktorenlexikon, “Fendt 720 Vario”