Deutz-Fahr Agrotron 165 or Steyr 8180 a?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 165 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8180 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrotron 165 suits loader and hydraulic implement work better on this data: 39% (20.4 L/min / 5.4 gpm) more hydraulic flow.
- The Deutz-Fahr Agrotron 165 suits road haulage better on this data: 18% (1,500 kg / 3,307 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron 165 | 8180 a | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 117.8 kW (158.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 117.8 kW (158.0 hp)Traktorenlexikon, “Steyr 8180” | Not comparableNot comparable on power at the PTO shaft: the Agrotron 165 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8180 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 165 and the 8180 a. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron 165 and the 8180 a. |
| Which pumps more oil for implements? | 72.8 L/min (19.2 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 52.4 L/min (13.8 gpm)Traktorenlexikon, “Steyr 8180” | AheadThe Deutz-Fahr Agrotron 165 has 39% more hydraulic flow (20.4 L/min / 5.4 gpm) than the Steyr 8180a (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 6,620 kg (14,595 lb)Traktorenlexikon, “Steyr 8180” | No figureNo call on three-point lift: no figure on record for the Agrotron 165. |
| Which is heavier, for traction? | 6,425 kg (14,165 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 6,012 kg (13,254 lb)Traktorenlexikon, “Steyr 8180” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 10,000 kg (22,046 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 8,500 kg (18,739 lb)Traktorenlexikon, “Steyr 8180” | AheadThe Deutz-Fahr Agrotron 165 has 18% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Steyr 8180a (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 12 to 36Traktorenlexikon, “Steyr 8180” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron 165 and the 8180 a. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 8180” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 1000 rpmTraktorenlexikon, “Steyr 8180” | AheadThe Deutz-Fahr Agrotron 165 offers 540 rpm at the PTO, which the Steyr 8180a does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | independentTraktorenlexikon, “Steyr 8180” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 165 MK3” | 4WDTraktorenlexikon, “Steyr 8180” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2000–2003 | 1986–1993 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 165 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron 165 has 39% more hydraulic flow (20.4 L/min / 5.4 gpm) than the Steyr 8180a (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron 165 has 18% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Steyr 8180a (both maximum permissible mass, as stated by the source).
- The Deutz-Fahr Agrotron 165 offers 540 rpm at the PTO, which the Steyr 8180a does not (as stated by the sources).
- The Deutz-Fahr Agrotron 165 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrotron 165 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8180 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.
← Every figure for both machines, side by side, with sources