4 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 1652000–2003No measured PTO figureTractor twoDoppstadt Trac 1601999–2001No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 165 and the Trac 160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Agrotron 165 | Trac 160 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 158.0 hp | 158 hp | — |
| Engine declared | Deutz BF6M 1013 E | — | — |
| Displacement declared | 7.15 L | — | — |
| Maximum torque declared | 452 lb·ft · 613 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Hydraulically operated wet ZF multi-disc clutch with nine discs | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 19.2 gpm · 72.8 L/min | — | — |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,165 lb · 6,425 kg | 15,829 lb · 7,180 kg | +12% Trac 160 |
| Maximum permissible mass declared | 22,046 lb · 10,000 kg | — | — |
| Wheelbase declared | 108.9 in · 2,767 mm | 110.2 in · 2,800 mm | — |
| Length declared | 187.3 in · 4,757 mm | 188.6 in · 4,790 mm | — |
| Width declared | 98.4 in · 2,500 mm | 98.4 in · 2,500 mm | — |
| Ground clearance declared | 22.4 in · 570 mm | 27.2 in · 690 mm | +21% Trac 160 |
| Fuel tank declared | 338.1 qt · 320 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 165 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 165 MK3”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”
Doppstadt Trac 160 sources
- Source: Traktorenlexikon, “Doppstadt Trac 160”