Deutz-Fahr Agrotron 160 or New Holland TM165?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM165 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 160 suits loader and hydraulic implement work better on this data: 29% (2,270 kg / 5,004 lb) more three-point lift.
  • The Deutz-Fahr Agrotron 160 suits road haulage better on this data: 14% (1,500 kg / 3,307 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 160 and New Holland TM165, with the call on each
QuestionAgrotron 160TM165Call
Which puts more power through the PTO shaft?117.8 kW (158.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 160”117.7 kW (157.8 hp)Traktorenlexikon, “New Holland TM165”Not comparableNot comparable on power at the PTO shaft: the Agrotron 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM165 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 160 and the TM165.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 160 and the TM165.
Which pumps more oil for implements?115.0 L/min (30.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 160”No figureNo call on hydraulic flow: no figure on record for the TM165.
Which lifts more on the three-point hitch?10,000 kg (22,046 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 160”7,730 kg (17,042 lb)Traktorenlexikon, “New Holland TM165”AheadThe Deutz-Fahr Agrotron 160 has 29% more lift (2,270 kg / 5,004 lb) than the New Holland TM165 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,900 kg (15,212 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 160”6,333 kg (13,962 lb)Traktorenlexikon, “New Holland TM165”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?12,000 kg (26,455 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 160”10,500 kg (23,149 lb)Traktorenlexikon, “New Holland TM165”AheadThe Deutz-Fahr Agrotron 160 has 14% higher maximum permissible mass (1,500 kg / 3,307 lb) than the New Holland TM165 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?18Traktorenlexikon, “Deutz-Fahr Agrotron 160”18 to 28Traktorenlexikon, “New Holland TM165”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 160 and the TM165.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 160”40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM165”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 160”540/540E/1000 rpmTraktorenlexikon, “New Holland TM165”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “New Holland TM165”No figureNo call on PTO independence: not stated for the Agrotron 160.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 160”4WDTraktorenlexikon, “New Holland TM165”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20011999–2002EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 160 has 29% more lift (2,270 kg / 5,004 lb) than the New Holland TM165 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr Agrotron 160 has 14% higher maximum permissible mass (1,500 kg / 3,307 lb) than the New Holland TM165 (both maximum permissible mass, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agrotron 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM165 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources