Deutz-Fahr Agrotron 160 or Fiat M 160?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the M 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 160 suits loader and hydraulic implement work better on this data: 17% (16.6 L/min / 4.4 gpm) more hydraulic flow.
  • The Deutz-Fahr Agrotron 160 suits road haulage better on this data: 26% (2,500 kg / 5,512 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 160 and Fiat M 160, with the call on each
QuestionAgrotron 160M 160Call
Which puts more power through the PTO shaft?117.8 kW (158.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 160”117.8 kW (158.0 hp)Traktorenlexikon, “Fiatagri M160”Not comparableNot comparable on power at the PTO shaft: the Agrotron 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the M 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 160 and the M 160.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agrotron 160 and the M 160.
Which pumps more oil for implements?115.0 L/min (30.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 160”98.4 L/min (26.0 gpm)Traktorenlexikon, “Fiatagri M160”AheadThe Deutz-Fahr Agrotron 160 has 17% more hydraulic flow (16.6 L/min / 4.4 gpm) than the Fiat M 160 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?10,000 kg (22,046 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 160”6,680 kg (14,727 lb)Traktorenlexikon, “Fiatagri M160”Not comparableNot comparable on three-point lift: the Agrotron 160: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron 160”); the M 160: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri M160”) — not the same quantity, basis and condition.
Which is heavier, for traction?6,900 kg (15,212 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 160”6,080 kg (13,404 lb)Traktorenlexikon, “Fiatagri M160”Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 160 is 13% heavier (820 kg / 1,808 lb) than the Fiat M 160 (both unladen weight, as stated by the source).
Which may carry more ballast and load?12,000 kg (26,455 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 160”9,500 kg (20,944 lb)Traktorenlexikon, “Fiatagri M160”AheadThe Deutz-Fahr Agrotron 160 has 26% higher maximum permissible mass (2,500 kg / 5,512 lb) than the Fiat M 160 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?18Traktorenlexikon, “Deutz-Fahr Agrotron 160”18 to 24Traktorenlexikon, “Fiatagri M160”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Agrotron 160 and the M 160.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 160”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri M160”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 160”540/1000 rpmTraktorenlexikon, “Fiatagri M160”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the Agrotron 160 and the M 160.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 160”4WDTraktorenlexikon, “Fiatagri M160”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20011996–1999EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 160 has 17% more hydraulic flow (16.6 L/min / 4.4 gpm) than the Fiat M 160 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 160 is 13% heavier (820 kg / 1,808 lb) than the Fiat M 160 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrotron 160 has 26% higher maximum permissible mass (2,500 kg / 5,512 lb) than the Fiat M 160 (both maximum permissible mass, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agrotron 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the M 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the Agrotron 160: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron 160”); the M 160: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri M160”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources