7 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrotron 150 MK32000–2003No measured PTO figureTractor twoDeutz-Fahr Agrotron X 7202006–2013No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (75%); they were not built in overlapping years (2000–2003; 2006–2013). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 1 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 150 MK3 and Deutz-Fahr Agrotron X 720, field by field
FieldAgrotron 150 MK3Agrotron X 720Gap
Engine
Engine power, claimed claimed148.0 hp——
Engine declaredDeutz BF6M 1013 E——
Displacement declared7.15 L——
Maximum torque declared430 lb·ft · 583 N·m——
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h24.9–31.1 mph · 40–50 km/h—
Clutch declaredHydraulically operated wet ZF multi-disc clutch with eight plates——
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Hydraulic control declared—Load sensing—
Pump flow declared19.2 gpm · 72.8 L/min——
Rear PTO speeds declared540 rpm / 1000 rpm540 rpm / 750 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared11,883 lb · 5,390 kg20,790–23,005 lb · 9,430–10,435 kgdiffers
Maximum permissible mass declared20,944 lb · 9,500 kg30,865 lb · 14,000 kg+47% Agrotron X 720
Wheelbase declared108.9 in · 2,767 mm121.9 in · 3,095 mm+12% Agrotron X 720
Length declared187.3 in · 4,757 mm207.4 in · 5,268 mm+11% Agrotron X 720
Width declared97.2 in · 2,470 mm108.3 in · 2,750 mm+11% Agrotron X 720
Ground clearance declared22.4 in · 570 mm19.4–21.6 in · 494–548 mmdiffers
Turning radius, braked declared—22.1 ft · 6.75 m—
Fuel tank declared285.3 qt · 270 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agrotron 150 MK3 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 150 MK3”
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”

Deutz-Fahr Agrotron X 720 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron X 720”