Deutz-Fahr Agrotron 130.6 or New Holland T 6040 Elite (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 130.6 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6040 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland T 6040 Elite suits loader and hydraulic implement work better on this data: 30% (24.9 L/min / 6.6 gpm) more hydraulic flow and 26% (1,644 kg / 3,624 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 130.6 and New Holland T 6040 Elite (Traktorenlexikon), with the call on each
QuestionAgrotron 130.6T 6040 EliteCall
Which puts more power through the PTO shaft?89.8 kW (120.4 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”89.7 kW (120.3 hp)Traktorenlexikon, “New Holland T 6040 Elite”Not comparableNot comparable on power at the PTO shaft: the Agrotron 130.6 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6040 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 130.6 and the T 6040 Elite.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 130.6 and the T 6040 Elite.
Which pumps more oil for implements?83.0 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”107.9 L/min (28.5 gpm)Traktorenlexikon, “New Holland T 6040 Elite”AheadThe New Holland T 6040 Elite has 30% more hydraulic flow (24.9 L/min / 6.6 gpm) than the Deutz-Fahr Agrotron 130.6 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”7,864 kg (17,337 lb)Traktorenlexikon, “New Holland T 6040 Elite”AheadThe New Holland T 6040 Elite has 26% more lift (1,644 kg / 3,624 lb) than the Deutz-Fahr Agrotron 130.6 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,460 kg (12,037 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”5,730 kg (12,632 lb)Traktorenlexikon, “New Holland T 6040 Elite”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,500 kg (18,739 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”9,000 kg (19,842 lb)Traktorenlexikon, “New Holland T 6040 Elite”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?24Traktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”16 to 17Traktorenlexikon, “New Holland T 6040 Elite”AheadThe Deutz-Fahr Agrotron 130.6 has 41% more forward gears (7 gears) than the New Holland T 6040 Elite (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 130.6 and the T 6040 Elite.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T 6040 Elite”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”540/540E/1000 rpmTraktorenlexikon, “New Holland T 6040 Elite”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “New Holland T 6040 Elite”No figureNo call on PTO independence: not stated for the Agrotron 130.6.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 130 (NEW)”4WDTraktorenlexikon, “New Holland T 6040 Elite”; OECD test report 2462, 2009EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2005–20082007–2012EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland T 6040 Elite has 30% more hydraulic flow (24.9 L/min / 6.6 gpm) than the Deutz-Fahr Agrotron 130.6 (both pump flow, as stated by the source).
  • The New Holland T 6040 Elite has 26% more lift (1,644 kg / 3,624 lb) than the Deutz-Fahr Agrotron 130.6 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr Agrotron 130.6 has 41% more forward gears (7 gears) than the New Holland T 6040 Elite (both forward gears, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agrotron 130.6 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6040 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources