4 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 120 MK32000–2003No measured PTO figureTractor twoMassey Ferguson MF 74652004–2012No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 120 MK3 and the MF 7465 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | Agrotron 120 MK3 | MF 7465 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118.4 hp | 118.4 hp | — |
| Engine declared | Deutz BF6M 1013 E | Perkins 1106 C-60 TA | differs |
| Displacement declared | 7.15 L | — | — |
| Maximum torque declared | 355 lb·ft · 481 N·m | 340 lb·ft · 461 N·m | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9–31.1 mph · 40–50 km/h | — |
| Clutch declared | Hydraulically operated wet ZF multi-disc clutch with eight discs | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 19.2 gpm · 72.8 L/min | 31.7 gpm · 119.9 L/min | +65% MF 7465 |
| Pressure declared | — | 2,176 psi · 150 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,817 lb · 5,360 kg | 14,837 lb · 6,730 kg | +26% MF 7465 |
| Maximum permissible mass declared | — | 20,944 lb · 9,500 kg | — |
| Wheelbase declared | 108.9 in · 2,767 mm | 109.4 in · 2,780 mm | — |
| Length declared | 187.3 in · 4,757 mm | 187.0 in · 4,750 mm | — |
| Width declared | 97.2 in · 2,470 mm | 96.5 in · 2,450 mm | — |
| Ground clearance declared | 22.4 in · 570 mm | 16.5 in · 420 mm | +36% Agrotron 120 MK3 |
| Fuel tank declared | 285.3 qt · 270 L | 285.3 qt · 270.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 120 MK3 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”
Massey Ferguson MF 7465 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 7465”