8 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrotron 115 MK32001–2003No measured PTO figureTractor twoFendt Favorit 711 Variofrom 1999No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 115 MK3 and the Favorit 711 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 115 MK3 and Fendt Favorit 711 Vario, field by field
FieldAgrotron 115 MK3Favorit 711 VarioGap
Engine
Engine power, claimed claimed114 hp113.7 hp—
Engine declaredDeutz BF6M 1012 ECDeutz BF6M 2013 Cdiffers
Displacement declared4.79 L5.70 L+19% Favorit 711 Vario
Maximum torque declared362 lb·ft · 491 N·m——
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h31.1 mph · 50 km/hdiffers
Clutch declaredHydraulically-operated wet ZF multi-plate clutch with eight discs of 200 mm diameter——
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared21.9 gpm · 83.0 L/min29.1 gpm · 110.0 L/min+33% Favorit 711 Vario
Pressure declared—2,901 psi · 200 bar—
Rear PTO speeds declared540 rpm / 1000 rpm540 rpm / 750 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared11,133 lb · 5,050 kg12,456–13,603 lb · 5,650–6,170 kgdiffers
Maximum permissible mass declared18,739 lb · 8,500 kg20,944 lb · 9,500 kg+12% Favorit 711 Vario
Wheelbase declared104.2 in · 2,647 mm106.3 in · 2,700 mm—
Length declared180.6 in · 4,587 mm181.7–182.7 in · 4,615–4,640 mm—
Width declared98.4 in · 2,500 mm94.1–95.6 in · 2,390–2,429 mm—
Ground clearance declared20.5 in · 520 mm20.8 in · 528 mm—
Turning radius, braked declared—16.1 ft · 4.90 m—
Fuel tank declared285.3 qt · 270 L317.0 qt · 300 L+11% Favorit 711 Vario

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agrotron 115 MK3 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 115 MK3”

Fendt Favorit 711 Vario sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 711 Vario”
  • Source: Traktorenlexikon, “Fendt Favorit 714 Vario”