12 material differences

Tractor oneDeutz-Fahr Agrotron 1101997–2000No measured PTO figureTractor twoJohn Deere 30551992–1993No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 110 and the 3055 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 110 and John Deere 3055, field by field
FieldAgrotron 1103055Gap
Engine
Engine power, claimed claimed103.7 hp103.7 hp—
Engine declaredDeutz. BF6M 1012 EJohn Deere 6.359 DL-011differs
Displacement declared4.79 L5.88 L+23% 3055
Maximum torque declared306 lb·ft · 415 N·m285 lb·ft · 387 N·m+7% Agrotron 110
Transmission
Top speed declared18.6–31.1 mph · 30–50 km/h18.6 mph · 30 km/hdiffers
Clutch declaredElectro-hydraulically operated ZF multi-disc clutch running in an oil bathPedal-operated, dry LuK single-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centreClosed centrediffers
Hydraulic control declaredLoad sensing——
Pump flow declared21.9 gpm · 83.0 L/min24.2 gpm · 91.5 L/min+10% 3055
Pressure declared—3,336 psi · 230 bar—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared11,045 lb · 5,010 kg9,524 lb · 4,320 kg+16% Agrotron 110
Maximum permissible mass declared18,739 lb · 8,500 kg——
Wheelbase declared104.2 in · 2,647 mm100.4 in · 2,551 mm—
Length declared178.0 in · 4,520 mm166.9 in · 4,240 mm+7% Agrotron 110
Width declared83.9 in · 2,130 mm89.0 in · 2,260 mm+6% 3055
Ground clearance declared20.5 in · 520 mm17.3 in · 440 mm+18% Agrotron 110
Turning radius, braked declared—13.2 ft · 4.01 m—
Fuel tank declared274.7 qt · 260 L127.9 qt · 121.0 L+115% Agrotron 110

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agrotron 110 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 110”
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 105 MK3”

John Deere 3055 sources

Source
  • Source: Traktorenlexikon, “John Deere 3055”