Deutz-Fahr Agrotron 106 or Renault 106-54 TL?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 106 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 106-54 TL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 106 suits road haulage better on this data: 31% (2,000 kg / 4,409 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 106 and Renault 106-54 TL, with the call on each
QuestionAgrotron 106106-54 TLCall
Which puts more power through the PTO shaft?73.6 kW (98.7 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 106”73.6 kW (98.7 hp)Traktorenlexikon, “Renault 106-54 TL/TM R7842”Not comparableNot comparable on power at the PTO shaft: the Agrotron 106 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 106-54 TL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 106 and the 106-54 TL.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 106 and the 106-54 TL.
Which pumps more oil for implements?78.4 L/min (20.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 106”47.2 L/min (12.5 gpm)Traktorenlexikon, “Renault 106-54 TL/TM R7842”AheadThe Deutz-Fahr Agrotron 106 has 66% more hydraulic flow (31.2 L/min / 8.2 gpm) than the Renault 106-54 TL (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 106”7,260 kg (16,006 lb)Traktorenlexikon, “Renault 106-54 TL/TM R7842”AheadThe Renault 106-54 TL has 17% more lift (1,040 kg / 2,293 lb) than the Deutz-Fahr Agrotron 106 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,010 kg (11,045 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 106”4,795 kg (10,571 lb)Traktorenlexikon, “Renault 106-54 TL/TM R7842”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,500 kg (18,739 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 106”6,500 kg (14,330 lb)Traktorenlexikon, “Renault 106-54 TL/TM R7842”AheadThe Deutz-Fahr Agrotron 106 has 31% higher maximum permissible mass (2,000 kg / 4,409 lb) than the Renault 106-54 TL (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?20 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 106”16Traktorenlexikon, “Renault 106-54 TL/TM R7842”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 106 and the 106-54 TL.
Which is faster on the road?30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 106”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 106-54 TL/TM R7842”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 106”540/1000 rpmTraktorenlexikon, “Renault 106-54 TL/TM R7842”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 106”independentTraktorenlexikon, “Renault 106-54 TL/TM R7842”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 106”4WDTraktorenlexikon, “Renault 106-54 TL/TM R7842”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20001991–2000Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 106 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 106 has 66% more hydraulic flow (31.2 L/min / 8.2 gpm) than the Renault 106-54 TL (both pump flow, as stated by the source).
  • The Renault 106-54 TL has 17% more lift (1,040 kg / 2,293 lb) than the Deutz-Fahr Agrotron 106 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr Agrotron 106 has 31% higher maximum permissible mass (2,000 kg / 4,409 lb) than the Renault 106-54 TL (both maximum permissible mass, as stated by the source).
  • The Deutz-Fahr Agrotron 106 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 106 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 106-54 TL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources