Deutz-Fahr Agrotron 105 or Massey Ferguson MF 3085 A?

Which should you choose?

On performance, every comparable figure that differs favours the Deutz-Fahr Agrotron 105: hydraulic flow and three-point lift. On features, the Massey Ferguson 3085A is ahead on forward gears.

  • The Deutz-Fahr Agrotron 105 suits loader and hydraulic implement work better on this data: 22% (12.0 L/min / 3.2 gpm) more hydraulic flow and 29% (1,055 kg / 2,327 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 105 and Massey Ferguson MF 3085 A, with the call on each
QuestionAgrotron 105MF 3085 ACall
Which puts more power through the PTO shaft?67.2 kW (90.1 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 105”65.5 kW (87.8 hp)Traktorenlexikon, “Massey Ferguson MF 3085”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 105 and the MF 3085 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agrotron 105 and the MF 3085 A.
Which pumps more oil for implements?66.0 L/min (17.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 105”54.0 L/min (14.3 gpm)Traktorenlexikon, “Massey Ferguson MF 3085”AheadThe Deutz-Fahr Agrotron 105 has 22% more hydraulic flow (12.0 L/min / 3.2 gpm) than the Massey Ferguson 3085A (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,635 kg (10,218 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 105”3,579 kg (7,891 lb)Traktorenlexikon, “Massey Ferguson MF 3085”AheadThe Deutz-Fahr Agrotron 105 has 29% more lift (1,055 kg / 2,327 lb) than the Massey Ferguson 3085A (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,500 kg (9,921 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 105”4,750 kg (10,472 lb)Traktorenlexikon, “Massey Ferguson MF 3085”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 105”7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 3085”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 105”32Traktorenlexikon, “Massey Ferguson MF 3085”AheadThe Massey Ferguson 3085A has 33% more forward gears (8 gears) than the Deutz-Fahr Agrotron 105 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Agrotron 105 and the MF 3085 A.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 105”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 3085”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 105”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3085”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 105”independentTraktorenlexikon, “Massey Ferguson MF 3085”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 105”4WDTraktorenlexikon, “Massey Ferguson MF 3085”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20011992–1995Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 105 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 105 has 22% more hydraulic flow (12.0 L/min / 3.2 gpm) than the Massey Ferguson 3085A (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 105 has 29% more lift (1,055 kg / 2,327 lb) than the Massey Ferguson 3085A (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 3085A has 33% more forward gears (8 gears) than the Deutz-Fahr Agrotron 105 (both forward gears, as stated by the source).
  • The Deutz-Fahr Agrotron 105 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources