10 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotrac 110from 2004No measured PTO figureTractor twoFendt 411 Vario2006–2013No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2004–2004; 2006–2013). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agrotrac 110 | 411 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 99 hp | 99 hp | — |
| Engine declared | Lamborghini 1000.6 W | Deutz TCD 2012 L4-4V | differs |
| Displacement declared | 6.00 L | 4.04 L | +49% Agrotrac 110 |
| Maximum torque declared | 288 lb·ft · 390 N·m | 372 lb·ft · 505 N·m | +29% 411 Vario |
| Transmission | |||
| Top speed declared | 23.6 mph · 38 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | turbo clutch function | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 15.3 gpm · 58.0 L/min | 19.8 gpm · 75.0 L/min | +29% 411 Vario |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,524 lb · 4,320 kg | 11,905 lb · 5,400 kg | +25% 411 Vario |
| Wheelbase declared | 103.7 in · 2,633 mm | 95.2 in · 2,417 mm | +9% Agrotrac 110 |
| Length declared | 161.5 in · 4,102 mm | 167.4 in · 4,252 mm | — |
| Width declared | 82.0–90.7 in · 2,082–2,304 mm | 92.1 in · 2,340 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 18.2 in · 462 mm | — |
| Fuel tank declared | 147.9 qt · 140 L | 258.9 qt · 245 L | +75% 411 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotrac 110 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotrac 110”
Fendt 411 Vario sources
- Source: Traktorenlexikon, “Fendt 411 Vario”