Deutz-Fahr Agrosun 140 or New Holland TM 150 (Traktorenlexikon)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrosun 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The New Holland TM 150 suits loader and hydraulic implement work better on this data: 85% (54.2 L/min / 14.3 gpm) more hydraulic flow and 29% (1,556 kg / 3,430 lb) more three-point lift.
- The New Holland TM 150 suits road haulage better on this data: 18% (1,500 kg / 3,307 lb) more maximum permissible mass and 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrosun 140 | TM 150 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 103.1 kW (138.3 hp)Traktorenlexikon, “Deutz-Fahr Agrosun 140” | 103 kW (138 hp)Traktorenlexikon, “New Holland TM150” | Not comparableNot comparable on power at the PTO shaft: the Agrosun 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrosun 140 and the TM 150. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrosun 140 and the TM 150. |
| Which pumps more oil for implements? | 64.0 L/min (16.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrosun 140” | 118.2 L/min (31.2 gpm)Traktorenlexikon, “New Holland TM150” | AheadThe New Holland TM 150 has 85% more hydraulic flow (54.2 L/min / 14.3 gpm) than the Deutz-Fahr Agrosun 140 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 5,400 kg (11,905 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 140” | 6,956 kg (15,335 lb)Traktorenlexikon, “New Holland TM150” | AheadThe New Holland TM 150 has 29% more lift (1,556 kg / 3,430 lb) than the Deutz-Fahr Agrosun 140 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 5,090 kg (11,222 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 140” | 6,333 kg (13,962 lb)Traktorenlexikon, “New Holland TM150” | Ahead (a fact, not an advantage)The New Holland TM 150 is 24% heavier (1,243 kg / 2,740 lb) than the Deutz-Fahr Agrosun 140 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 8,500 kg (18,739 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 140” | 10,000 kg (22,046 lb)Traktorenlexikon, “New Holland TM150” | AheadThe New Holland TM 150 has 18% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Deutz-Fahr Agrosun 140 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Deutz-Fahr Agrosun 140” | 18 to 24Traktorenlexikon, “New Holland TM150” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrosun 140 and the TM 150. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr Agrosun 140” | 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM150” | AheadThe New Holland TM 150 has 33% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrosun 140 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrosun 140” | 540/540E/1000 rpmTraktorenlexikon, “New Holland TM150” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrosun 140” | independentTraktorenlexikon, “New Holland TM150” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrosun 140” | 4WDTraktorenlexikon, “New Holland TM150”; OECD test report 1920, 2000 | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2004 | 1999–2002 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland TM 150 has 85% more hydraulic flow (54.2 L/min / 14.3 gpm) than the Deutz-Fahr Agrosun 140 (both pump flow, as stated by the source).
- The New Holland TM 150 has 29% more lift (1,556 kg / 3,430 lb) than the Deutz-Fahr Agrosun 140 (both lift at the hitch ends, as stated by the source).
- The New Holland TM 150 is 24% heavier (1,243 kg / 2,740 lb) than the Deutz-Fahr Agrosun 140 (both unladen weight, as stated by the source).
- The New Holland TM 150 has 18% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Deutz-Fahr Agrosun 140 (both maximum permissible mass, as stated by the source).
- The New Holland TM 150 has 33% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrosun 140 (both top speed forward, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrosun 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources