Deutz-Fahr Agrosun 120 vs John Deere 7400 (A)

9 material differences · fewer than 12

Tractor one

1998–2004

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the Agrosun 120 and the 7400 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrosun 120 and John Deere 7400 (A), field by field
Field	Agrosun 120	7400 (A)	Gap
Engine
Engine power, claimed claimed	118.4 hp	118.4 hp	—
Engine declared	K.H.D. BF6L 913 T	John Deere 6.068 TRW-02	differs
Displacement declared	6.13 L	6.79 L	+11% 7400 (A)
Maximum torque declared	—	350 lb·ft · 474 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	16.9 gpm · 64.0 L/min	25.9 gpm · 98.0 L/min	+53% 7400 (A)
Pressure declared	—	2,538 psi · 175 bar	—
Three-point lift at ends declared	11,905 lb · 5,400 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,001 lb · 4,990 kg	12,663 lb · 5,744 kg	+15% 7400 (A)
Maximum permissible mass declared	17,857 lb · 8,100 kg	19,842 lb · 9,000 kg	+11% 7400 (A)
Wheelbase declared	108.7 in · 2,761 mm	103.3 in · 2,625 mm	—
Length declared	181.9 in · 4,620 mm	174.6 in · 4,435 mm	—
Width declared	92.5 in · 2,350 mm	110.6 in · 2,808 mm	+19% 7400 (A)
Height declared	108.7 in · 2,760 mm	113.4 in · 2,880 mm	—
Ground clearance declared	20.5 in · 520 mm	14.2 in · 360 mm	+44% Agrosun 120
Fuel tank declared	253.6 qt · 240 L	215.6 qt · 204.0 L	+18% Agrosun 120

Source

Source