Deutz-Fahr Agrosun 100 or Massey Ferguson MF 5455 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrosun 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5455 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrosun 100 suits loader and hydraulic implement work better on this data: 11% (6.4 L/min / 1.7 gpm) more hydraulic flow.
- The Massey Ferguson MF 5455 (A) suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrosun 100 | MF 5455 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 73.6 kW (98.7 hp)Traktorenlexikon, “Deutz-Fahr Agrosun 100” | 73.6 kW (98.7 hp)Traktorenlexikon, “Massey Ferguson MF 5455” | Not comparableNot comparable on power at the PTO shaft: the Agrosun 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5455 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrosun 100 and the MF 5455 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrosun 100 and the MF 5455 (A). |
| Which pumps more oil for implements? | 64.0 L/min (16.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrosun 100” | 57.6 L/min (15.2 gpm)Traktorenlexikon, “Massey Ferguson MF 5455” | AheadThe Deutz-Fahr Agrosun 100 has 11% more hydraulic flow (6.4 L/min / 1.7 gpm) than the Massey Ferguson MF 5455 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,600 kg (10,141 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 100” | 4,780 kg (10,538 lb)Traktorenlexikon, “Massey Ferguson MF 5455” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 4,880 kg (10,759 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 100” | 3,935 kg (8,675 lb)Traktorenlexikon, “Massey Ferguson MF 5455” | Ahead (a fact, not an advantage)The Deutz-Fahr Agrosun 100 is 24% heavier (945 kg / 2,083 lb) than the Massey Ferguson MF 5455 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 100” | 7,560 kg (16,667 lb)Traktorenlexikon, “Massey Ferguson MF 5455” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Deutz-Fahr Agrosun 100” | 16Traktorenlexikon, “Massey Ferguson MF 5455” | AheadThe Deutz-Fahr Agrosun 100 has 50% more forward gears (8 gears) than the Massey Ferguson MF 5455 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrosun 100 and the MF 5455 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr Agrosun 100” | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5455” | AheadThe Massey Ferguson MF 5455 (A) has 33% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrosun 100 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrosun 100” | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5455” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrosun 100” | — | No figureNo call on PTO independence: not stated for the MF 5455 (A). |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrosun 100” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 5455” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2004 | 2003–2013 | Ahead (a fact, not an advantage)The Massey Ferguson MF 5455 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrosun 100 has 11% more hydraulic flow (6.4 L/min / 1.7 gpm) than the Massey Ferguson MF 5455 (A) (both pump flow, as stated by the source).
- The Deutz-Fahr Agrosun 100 is 24% heavier (945 kg / 2,083 lb) than the Massey Ferguson MF 5455 (A) (both unladen weight, as stated by the source).
- The Deutz-Fahr Agrosun 100 has 50% more forward gears (8 gears) than the Massey Ferguson MF 5455 (A) (both forward gears, as stated by the source).
- The Massey Ferguson MF 5455 (A) has 33% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrosun 100 (both top speed forward, as stated by the source).
- The Massey Ferguson MF 5455 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrosun 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5455 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources