Deutz-Fahr Agrosun 100 or Deutz-Fahr Agrotrac 110?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrosun 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotrac 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrosun 100 suits loader and hydraulic implement work better on this data: 10% (6.0 L/min / 1.6 gpm) more hydraulic flow.
  • The Deutz-Fahr Agrotrac 110 suits road haulage better on this data: 27% (8.0 km/h / 5.0 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrosun 100 and Deutz-Fahr Agrotrac 110, with the call on each
QuestionAgrosun 100Agrotrac 110Call
Which puts more power through the PTO shaft?73.6 kW (98.7 hp)Traktorenlexikon, “Deutz-Fahr Agrosun 100”74 kW (99 hp)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”Not comparableNot comparable on power at the PTO shaft: the Agrosun 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotrac 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrosun 100 and the Agrotrac 110.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrosun 100 and the Agrotrac 110.
Which pumps more oil for implements?64.0 L/min (16.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrosun 100”58.0 L/min (15.3 gpm)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”AheadThe Deutz-Fahr Agrosun 100 has 10% more hydraulic flow (6.0 L/min / 1.6 gpm) than the Deutz-Fahr Agrotrac 110 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,600 kg (10,141 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 100”4,700 kg (10,362 lb) to 6,200 kg (13,669 lb)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”Not comparableNot comparable on three-point lift: the Agrosun 100: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrosun 100”); the Agrotrac 110: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotrac 110”) — not the same quantity, basis and condition.
Which is heavier, for traction?4,880 kg (10,759 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 100”4,320 kg (9,524 lb)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”Ahead (a fact, not an advantage)The Deutz-Fahr Agrosun 100 is 13% heavier (560 kg / 1,235 lb) than the Deutz-Fahr Agrotrac 110 (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 100”No figureNo call on maximum permissible mass: no figure on record for the Agrotrac 110.
Which has the wider choice of gears?24Traktorenlexikon, “Deutz-Fahr Agrosun 100”15Traktorenlexikon, “Deutz-Fahr Agrotrac 110”AheadThe Deutz-Fahr Agrosun 100 has 60% more forward gears (9 gears) than the Deutz-Fahr Agrotrac 110 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrosun 100 and the Agrotrac 110.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr Agrosun 100”38 km/h (23.6 mph)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”AheadThe Deutz-Fahr Agrotrac 110 has 27% more top speed (8.0 km/h / 5.0 mph) than the Deutz-Fahr Agrosun 100 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrosun 100”540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotrac 110”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrosun 100”No figureNo call on PTO independence: not stated for the Agrotrac 110.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrosun 100”4WDTraktorenlexikon, “Deutz-Fahr Agrotrac 110”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20042004–Ahead (a fact, not an advantage)The Deutz-Fahr Agrotrac 110 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrosun 100 has 10% more hydraulic flow (6.0 L/min / 1.6 gpm) than the Deutz-Fahr Agrotrac 110 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrosun 100 is 13% heavier (560 kg / 1,235 lb) than the Deutz-Fahr Agrotrac 110 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrosun 100 has 60% more forward gears (9 gears) than the Deutz-Fahr Agrotrac 110 (both forward gears, as stated by the source).
  • The Deutz-Fahr Agrotrac 110 has 27% more top speed (8.0 km/h / 5.0 mph) than the Deutz-Fahr Agrosun 100 (both top speed forward, as stated by the source).
  • The Deutz-Fahr Agrotrac 110 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrosun 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotrac 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the Agrosun 100: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrosun 100”); the Agrotrac 110: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotrac 110”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources